Gary Lewis

The FAQ's (Bullnose Forum/Forum FAQ's in the menu) explains how to do image sizing, to some extent. But, here's what I did on yours, with the <> left off the front and back so you can see the code: nabble_img src="IMG_3678.jpeg" border="0" style="float:left; margin:.4em;"width="47%"/ nabble_img src="IMG_3677.jpeg" border="0" style="float:right; margin:.4em;"width="47%"/ The style="float:left; margin:.4em;" and the style="float:right; margin:.4em;" come from clicking the Left and Right buttons before inserting the pic. But the width="47%" I typed in, and that's how I control picture size. However, by placing one pic left and one right and having that margin of .4 you can't get a width of more than 47% and get them to stay side-by-side.

Do you know anyone with a drill press? That would make it easy to get a truly vertical hole. But, since you'll be going in with the plastic anchors, I assume, it isn't terribly critical.

Bob - Glad you had a good trip. And, glad you are taking care of your parents. But, it is fun busting through the snow. Wish we had enough to do that. fords4life - Maybe Bill can come through for you. He's told me of lots of things he has there, but I didn't realize he is using the trunk of a Continental for a storage container. Anyway, congrat's on getting the thermactor valve. Cory - Good fix on that shaft. Ingenious, as Dane said.

84/86 F-U150/350 - - M/T 6&8 All E4TZ 11A152-B •SW-1909-located on clutch pedal

This is the one from the 1995 F450/SuperDuty Jim got parts off of for you and I. But I don't remember what pump it had on it. I've got it in a tote in the shop and will look in the morning, for sure. I've been thinking it is a Saginaw, but don't know that it really is.

Yes, I've seen that before. But the title of this thread is E3TZ 19C872-C and that part shows E3TZ 19C872-A on the box. And that is for the following, although the buyer needs to head the warning of "FOR COMPLETE INSTALLATION (1) EACH OF THE FOLLOWING GROUP NUMBERS ARE REQUIRED - 9A567, 19703, 19708, 19C872, 19B968 and 19B969"

80/ F-U100/350 — w/factory installed speed control E2TZ 9C962-B

That's for an E-Series van, not an F or U-Series.

Yep, good question, Cory. But if there are any this mount will fit.

17B583_ PLATE and SWITCH ASSY. (WINDSHIELD WIPER MOTOR) 80/ F—U100/350 E2TZ 17B583-A

Jonathan - I'm confused and conflicted. I thought the stuff I got from Jim included a Saginaw pump, but now I'm not sure. I'll need to go look. Anyway, whatever pump it came with is probably the one I'm going to use since I've powder coated the bracket for that pump and I don't think the C2 and Sag use the same bracket. And, while he had to cut some hoses, I'm thinking I can just go back with hoses for that application. Right?

For BW t-cases PAD (SHIFT FORK INSERT) 7C430 5/8" long— 17/64" wide-5/32" wide EOTZ 7C430-A

80/ F100/350 — w/aft axle tank E2TZ 1386-A

For some Dana 44, 50, and 60 front axles. SLINGER (SPINDLE SHAFT OIL) 3C132 L.H.-inner at 3254 seal EOTZ 3C132-A

Another for a Borg Warner transfer case. (I had one in my hands yesterday.) WASHER (THRUST) 7D484 Sun gear-3 1/32" O.D-2 5/16" I.D.-1/8" thick—(4) ext. tabs EOTZ 7D484-C

You are right! They aren't seen very often. And that is a good price. But I know I have one NOS from Vernon, and think I have a very good one as well. However, someone needs to snap it up!

I'm not sure if I'm getting out to the shop tomorrow, but if not will do it on Wednesday. And I'm including your pics, in a much smaller scale, so I can get my head around them. Oh, and I'll measure the angle of the break.

That's for a Borg Warner t-case: 1 5/8" 0.D.-1 17/64" I.D.-3/32" thick EOTZ 7119—C

Congrat's! As for 9A819, here's what the catalog says:

I've only found the partial VIN that is stamped on the top of the frame roughly above the passenger's feet on the trucks I've had apart.

I agree with you, Shaun. All of the Bricknose trucks I've worked on had the air cleaner box on the driver's fender apron, as your second pic shows. I'm sure the catalog is wrong. Again.

This says 1985 to end of the catalog, which is 1989. TUBE ASSY. (OUTLET-ENGINE AIR CLEANER) 85/ F— U150/250 8 302 EFI PN E5TZ 9B659-B Marked E5TE 9R504-AB

Bingo! 83/85 R E3TZ 17A958-A

I'm subscribed! But as you know, I have one of these bumpers. However, I'd like to inset lights as well, so I'm following along. And, here's my bracket. But mine has an arm your doesn't have - and I think should. In any event, what measurements do you need? Here's why - that arm goes forward and braces the front of the bumper: