Bullnose Enthusiasts Forum

Merry Christmas! Documentation Is Ready

Classic

List

Threaded

Assigned: 81-F150-Explorer at priority

(Normal)

437 messages Options

1 ... 45678910 ... 22

Ford F834

Re: Merry Christmas! Documentation Is Ready

Administrator

Thanks Gary! Unless plans change both of my trucks will have 1345’s and these documents are very nice to have...

Unfortunately we already know of one part for them that cannot be found...

SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2

Gary Lewis

Re: Merry Christmas! Documentation Is Ready

Administrator

What part is that, Jonathan? Refresh my memory.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Ford F834

Re: Merry Christmas! Documentation Is Ready

Administrator

The speedometer drive gear. I tried to find the yellow one and the green one with no luck. I ended up buying a used transfer case that had a good gear.

Gary Lewis

Re: Merry Christmas! Documentation Is Ready

Administrator

Oh yes! Thanks. Did I call around here in Tulsa? There are three, I think, 4wd places that deal with used parts.

Gary, AKA "Gary fellow": Profile

Ford F834

Re: Merry Christmas! Documentation Is Ready

Administrator

Gary, I know you did some hunting on my behalf but I don’t know where you checked. I guess for me it is water under the bridge since I solved it with a low mileage transfer case with a good gear. This is one of those things, though, that would be good to have a spare of. My other 1345 is exempt from this problem as it has the GVOD rear case and the speedometer is driven by a GM gear in the GVOD output housing.

85lebaront2

Re: Merry Christmas! Documentation Is Ready

Administrator

I am damn glad I got rid of that issue on Darth, makes no difference what type of drive train, the speedometer signal comes off the rear axle tone ring.

Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

Ford F834

Re: Merry Christmas! Documentation Is Ready

Administrator

85lebaront2 wrote

I am damn glad I got rid of that issue on Darth, makes no difference what type of drive train, the speedometer signal comes off the rear axle tone ring.

So are you using an electric speedometer then? I have one of the 90’s medium duty electric speedometers that fits the Bullnose cluster, and I wondered about running it off of the tone ring since my crew cab axle is out of a ‘96. My only lament would be that is does not have a trip odometer and the scale goes only to 75mph.

Steve83

Re: Merry Christmas! Documentation Is Ready

Banned User

Ford F834 wrote

I have one of the 90’s medium duty electric speedometers that fits the Bullnose cluster, and I wondered about running it off of the tone ring since my crew cab axle is out of a ‘96. My only lament would be that is does not have a trip odometer and the scale goes only to 75mph.

PSOMs are common in JYs, so get the regular 85mph version. The captions in this photo album explain almost everything you never wanted to know about it:

I did that to my '83 back when I got sick of fighting speedo cables & gears, with tire changes, and low vacuum to the cruise servo...

Gary Lewis

Re: Merry Christmas! Documentation Is Ready

Administrator

Today I added a 1986 F-Series brochure: Literature/1986

Gary, AKA "Gary fellow": Profile

Ford F834

Re: Merry Christmas! Documentation Is Ready

Administrator

In reply to this post by Steve83

Steve, that is an impressive write up! You certainly don’t have to sell me on the merits of ditching the cable and gears, but I have to say that I am partial to the look of the original gauges. That would be the deal breaker for me unless there is a way to get one of the medium duty electric units working. I’m not sure how they do it, as the odometer is still a set of mechanical wheels, not a digital display. Gary, my apologies for derailing your documentation thread, perhaps these posts could me moved into a new topic?

Gary Lewis

Re: Merry Christmas! Documentation Is Ready

Administrator

Jonathan - I'm not worried about the thread being derailed. But the comments might be easier to find in another thread. If you start one with the appropriate title then I'll move the posts into that one.

Or, you can using your admin powers:

Create the new thread and get its Permalink

Go to the post you want to move, click More and then Move Post, paste the Permalink into the box, and click Move.

And then you can delete this post if you want.

Gary, AKA "Gary fellow": Profile

Gary Lewis

Re: Merry Christmas! Documentation Is Ready

Administrator

In reply to this post by Gary Lewis

Let's do a Take 2: http://www.garysgaragemahal.com/1986-f-series-pickups.html

I realized that the medium resolution jpg files that I used on the 1986 brochure make it hard to read some of the small print, like the notes on pages 13 and 18. But the high res pdf file that I have is slow to load and would be a pain if just looking casually at the pics.

So I made a compromise - I added tabs for Medium Resolution and High Resolution. And the way the page works is that when you first load it up it should always be on Medium Resolution tab and, therefore, load quickly. But, if you really want the nitty gritty detail you can click the High Res tab.

So, please take a look and let me know what you think so I know how to do this going forward. Does this approach give you quick loading? Does it get you the detail if you need it?

Gary, AKA "Gary fellow": Profile

1986F150Six

Re: Merry Christmas! Documentation Is Ready

Administrator

It opened quickly and looks great!

Gary Lewis

Re: Merry Christmas! Documentation Is Ready

Administrator

How quickly did the High Res doc open? If it opens fast enough then we may not need the Medium Res one.

(I'm not a good test as it is loading off my Google drive.)

Gary, AKA "Gary fellow": Profile

1986F150Six

Re: Merry Christmas! Documentation Is Ready

Administrator

Less than 10 seconds.

grumpin

Re: Merry Christmas! Documentation Is Ready

Mine took closer to 20 seconds. I looked at the two and zoomed in with the Chrome zoom for the page. The high res was much easier to read but it cut off some parts, i.e. the payload for 4x4's.

Then I tried the pop out feature and that worked great. I could zoom in with no problems.

Dane
1986 F250HD SC XLT Lariat 4x4 460 C6-Sold
1992 Bronco XLT 4x4 351W E4OD
1998 GMC Sierra SLE K1500 350 4L60E
Arizona

Gary Lewis

Re: Merry Christmas! Documentation Is Ready

Administrator

It took 10ish seconds for David, and 20ish seconds for grumpin. Was that just opening the page the first time? Or was that opening the High Res tab?

Gary, AKA "Gary fellow": Profile

grumpin

Re: Merry Christmas! Documentation Is Ready

Opening the page was right away with the med res.

Opening the high res was almost 20 seconds, the first page came right up, then the wait to be able to scroll down.

Dane
1986 F250HD SC XLT Lariat 4x4 460 C6-Sold
1992 Bronco XLT 4x4 351W E4OD
1998 GMC Sierra SLE K1500 350 4L60E
Arizona

Gary Lewis

Re: Merry Christmas! Documentation Is Ready

Administrator

Ok, that was my hope. Thanks.

I've added this disclaimer at the top:

Note that there are two versions - medium resolution and high resolution. The medium resolution version will load quickly and provide you a good view of the brochure. But if you need to see the small print, such as the foot notes for some of the tables, the high resolution version is the one to use. However, it will take a while to load depending on your network speed.

Now I need to do the same to a few of the recent doc's that I've added in high res mode, only.

Gary, AKA "Gary fellow": Profile

Gary Lewis

Re: Merry Christmas! Documentation Is Ready

Administrator

I've added the low res/high res function to both the 1985 Ford Truck and the 1986 Ford Trailer Towing brochures.

And, I discovered that some of my pdf's were showing poor quality renderings, so I replaced them. I'm sure there are probably others, so if you find one that looks really yukky then please let me know.

Gary, AKA "Gary fellow": Profile

1 ... 45678910 ... 22