EGR tube connector

I need a new connector to connect the tube to the manifold and am coming up empty handed.  any ideas?

George, if it is like the one for the 460s, good luck, a number of years ago I got one of the last NOS ones from my local dealer and it was $65 my cost for a little strange shaped elbow.

Is it shown in this illustration?  If so, give me the generic part number and I'll get you the complete #.  Maybe you can find it that way.

EDIT: The illustration would have been nice to include.  

Thanks for the info Gary.  It looks like Ghost truck strikes again.  Our set up is nothing like this.   There is a pipe that goes from under the carburetor/egr plate directly to the exhaust manifold.  i'll take some pics tomorrow..   We did get it running and we also have a leak where the sensor goes on the egr plate as well.  With all that is wrong, the 300 is actually purring like Eartha Kitt.

Where's it even coming from in that illustration?

9462???

The 3/8" pipe plug, 352532-S (PP-60) ???

Meowwww!    

thats the thing, its not in the illustration

the connector on the manifold is 3/8.  the pipe has a strange compression type connector on it and i have no way of connecting it to the manifold.  when we took it off the old manifold, the connector broke.  the connector on the end of the pipe is still good

the fitting on the manifold itself is like 3/4

Wouldn't be the first time the MPC is way off base.

You should just consider yourselves blessed!  

Is it any consideration that it may be military spec, and that Brutus is not built like trucks sold to civilians?

thats the problem, brutus is a military truck and we run into this alot

but my manifold is the exact same thing that i took off the truck.

https://www.ebay.com/itm/New-Exhaust-Manifold-1984-1985-1986-FORD-F150-F250-F350-Pickup-4-9L-300-6-cy/123594418540?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

As a suggestion, maybe look at the compression type connectors that larger air compressors use to connect the copper coil from pump head to the tank.

That sort of hardware is pretty common, and seems to be trying to do the same type of thing.

thats a thoght.  i might also talk to my friend at the machine ship, maybe he can cut the pipe and weld something onto it and we can put a fitting that will work.  the fitting in the manifold itself is 3/4 pipe thread

but then again, i may fiddle around a bit and just delete the egr all toghether and see what happens.  with it out of the loop the engine is running better and smoother then it ever has so i dont know what to think

Okay, so I'm going the guess the illustration is wrong.

There doesn't seem to be a reason your parts don't show.


Like I said, look at Quincy or Ingersoll Rand for the type of fitting you need.
Connecting tubing to a cast iron pump head is what they do.

You might need to completely recurve your distributor so Brutus doesn't get a death rattle when cruising, if you delete EGR.

But I'm no 300 expert.
YMMV

what do you mean by the death rattle?

The knocking you get when you have too much advance dialed in at light throttle.
That shockwave is breaking your rings and trying to melt holes in your pistons.

EGR makes the engine (under light load) think the mixture is richer than it is, because it displaces oxygen in the intake charge with gases that don't contribute to combustion.
The mix burns slower and cooler.
You can have advance, without detonation because of the charge reacting supersonically.

The charge burns slow enough that it doesn't go BANG before the piston reaches TDC.
We all know from chemistry that almost all reactions speed up with temperatures and pressure.
Detonation is combustion faster than the speed of sound in that medium.

The car companies want lean mixtures for mileage.
The EPA wants (wanted?) cooler combustion temperatures, because they decrease oxides of nitrogen.
The customer wants an engine that isn't suicidal.

Win, win, win!

yea i looked into how to recurve a distributor, no way i'm fooling with that.  Honestly, i wish i could put a duraspark distributor in it with a regular yf carb and get rid of all of he stuff, but a duraspark dist wont fit so thts out the  window too.     I'm going to look around and see what i can find for compression fittings, thing is is i really dont know what size it is.  I think i'm just going to take it off and see if my friend at the machine shop can do anything