I'm in Plainfield, Somerset county. About an hour from Lambertville. I used to ride my bike to New Hope regularly but haven't this summer.
Mark
‘84 F150 4x4 351W 4sp. Regular cab, long bed, all original.
'69 Continental MK III. Older restoration.
'95 Saab 900S Convertible.
'05 Saab 9-3 ARC Convertible 2.0T. Lime Yellow.
'09 Saab 9-3 AERO Convertible 2.8T. Sand Beige top.
'13 MINI Cooper Factory JCW 6sp.
'01 H-D Sportster.
'03 Yamaha FZ-1.
|
Wow, that's a good ride. We have lived all over that area. My son is in Piscataway. He and my wife are Rutgers grads. As well as my sister , brother in law and both nephews. The canal path through lambertville and new hope have been so crowded with people at home it's nuts. I don't even walk my dog there on weekends. On Mon, Jul 27, 2020, 5:06 PM BullnoseLuvr [via Bullnose Enthusiasts] <[hidden email]> wrote: I'm in Plainfield, Somerset county. About an hour from Lambertville. I used to ride my bike to New Hope regularly but haven't this summer.
Josh G
1984 F-150 Inline-Six 300 |
Air cleaner purchased on E-Bay and HEI Dizzy as well!
Thanks much everyone! Looking forward to getting this set up correctly!
Josh G
1984 F-150 Inline-Six 300 |
The new distributor is here ! Here is a pic as well as a pic of the instructions in case you admins want to post them. Doesn't look like too bad an install.
Josh G
1984 F-150 Inline-Six 300 |
Administrator
|
Progress is good!
Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake. Too much other stuff to mention. |
Administrator
|
In reply to this post by JG2020
Yep, progress IS good!
As for posting, you did. But let's see if this cleanup is easier to read:
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
I'd also note that Skip White has HEI install instructions posted on their website.
While I doubt those could be copied here without permission, they do exist as a page and not a jpeg.
Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake. Too much other stuff to mention. |
In reply to this post by Gary Lewis
Thanks Gary! I could scan and post as a PDF if that would be a better option to add these to the forum . On Sat, Aug 1, 2020, 10:31 PM Gary Lewis [via Bullnose Enthusiasts] <[hidden email]> wrote: Yep, progress IS good!
Josh G
1984 F-150 Inline-Six 300 |
Administrator
|
Jim - I perused the Skip White site but didn't find any instructions on installing the HEI. Could you point me to it?
Josh - A pdf would be a help. However, those instructions don't really have all the info the people need. In order to have the power that the HEI requires most people find that a relay is required. So I would have expected a schematic of how best to do that in their instructions. Maybe the Skip White instructions do?
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
Sorry, their site has changed quite a bit since I last bought someone a HEI.
I'm pretty sure it used to be under the 'tech' header.
Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake. Too much other stuff to mention. |
Administrator
|
That's where I thought it would be as well, but didn't find it.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
Thanks, Josh. Would this be easier to read? And, by the way, if you open it in a new tab you can search it 'cause I OCR'd it.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Awesome! I am going through video's on you tube about this install also. If/when I find some good ones I will post here.
Josh
Josh G
1984 F-150 Inline-Six 300 |
Edit this page |