Bullnose Enthusiasts Forum › Marketplace › Want To Buy

15x8" Ford Wagon Wheels

Classic

List

Threaded

21 messages Options

Machspeed

15x8" Ford Wagon Wheels

Administrator

I'm looking for a set of 15x8" Ford Wagon wheels. I don't need anything else, just the wheels. Thanks!

John

"Blackie" - 1986 F150 4x4 - Mildly warmed over 351W HO - Original owner

1986F150Six

Re: 15x8" Ford Wagon Wheels

Administrator

1/2 a set [2 wheels] currently listed on eBay:

https://www.ebay.com/itm/265257208660?epid=1924821435&hash=item3dc28fcb54:g:17MAAOSwwBRhDkjw

1986F150Six

Re: 15x8" Ford Wagon Wheels

Administrator

https://www.ebay.com/itm/294318386084?hash=item4486be2ba4:g:wDkAAOSwQCthDUax

Machspeed

Re: 15x8" Ford Wagon Wheels

Administrator

Thanks David, I saw the half set last night. Did not note the full set you posted up here. If I don't find anything local or at our show, I may go the ebay route.

John

"Blackie" - 1986 F150 4x4 - Mildly warmed over 351W HO - Original owner

Gary Lewis

Re: 15x8" Ford Wagon Wheels

Administrator

Ok, I used what I found in the attic to update our page at Documentation/Driveline/Wheels & Tires. And more specifically the tab called Wheel Types, Applications, Codes, etc and below that the Identification Codes tab. Oh, and there's a new picture on the "Pictures" tab.

Ya'll can go there and check it out. And here are some pics to whet your appetite:

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

salans7

Re: 15x8" Ford Wagon Wheels

Gary, don't forget that there were two styles of 8-spoke wheels. You posted the later version, the earlier version has a deeper dish and the spokes are a little different. I have some of the early version 8-spokes that I've been storing for Chris Lott, so if you'd like I can take a picture of one for the page.

Gary Lewis

Re: 15x8" Ford Wagon Wheels

Administrator

Yes, Shaun, please take some pics. And please include a shot of the code by the valve stem.

Gary, AKA "Gary fellow": Profile

Machspeed

Re: 15x8" Ford Wagon Wheels

Administrator

In reply to this post by salans7

Shaun, that's interesting. I too would like to see that. Gary, thank you!!!

John

"Blackie" - 1986 F150 4x4 - Mildly warmed over 351W HO - Original owner

Gary Lewis

Re: 15x8" Ford Wagon Wheels

Administrator

For those that haven't "twigged", as the Brits would say, John and I've come to an agreement on the wheels.

And John they are now downstairs, in the way, as you can see.

You might ask how a 74 year old man carried them down the stairs w/o falling, and I'd say "He's smarter than that."

When I built the shop I installed a trap door, an I-beam, and a winch. Works very nicely!

Gary, AKA "Gary fellow": Profile

Machspeed

Re: 15x8" Ford Wagon Wheels

Administrator

I saw the winch yesterday but missed the trap door. Ingenious! I'd have felt bad you pulling those things out of the attic. Work smarter, not harder ey, Gary!

John

"Blackie" - 1986 F150 4x4 - Mildly warmed over 351W HO - Original owner

grumpin

Re: 15x8" Ford Wagon Wheels

In reply to this post by Gary Lewis

Well, that’s slicker than a snotty doorknob!

Dane
1986 F250HD SC XLT Lariat 4x4 460 C6-Sold
1992 Bronco XLT 4x4 351W E4OD
1998 GMC Sierra SLE K1500 350 4L60E
Arizona

1986F150Six

Re: 15x8" Ford Wagon Wheels

Administrator

In reply to this post by Machspeed

You might ask how a 74 year old man carried them down the stairs w/o falling, and I'd say "He's smarter than that."

When I built the shop I installed a trap door, an I-beam, and a winch. Works very nicely!

And with just the right safety features, that 74 year old man's grandtwins can go up and down?

Gary Lewis

Re: 15x8" Ford Wagon Wheels

Administrator

Dad would have said "Slicker than snot on a glass door knob."

But, no way am I letting the grandtwins ride that winch. It says not to use it for humans, and I can see why because as the cable unrolls off the drum it lurches. And the cable itself has some kinks in it, which cause other lurches when they go through the pulley.

But I might let them run it.

Gary, AKA "Gary fellow": Profile

salans7

Re: 15x8" Ford Wagon Wheels

This post was updated on .

Here's the photos as promised. I took one from above, one from the side to show the "dish", one showing the width, one showing the backspacing, and one showing the stampings around the valve stem.

These are part number D8TZ-1015-D as they are 15x8 and not 15x6. According to Bill (NumberDummy), they were only offered in 78/79 and thus would not have come on a Bullnose truck, although the 1980 literature shows a few trucks with what looks to be 15x8 spoked wheels so that's confusing.

1980 Bronco brochure screen grab showing a 15x8. Later on in the brochure, you can see a Bronco with the 15x6 version of these wheels.

Gary Lewis

Re: 15x8" Ford Wagon Wheels

Administrator

Yeah, the brochures frequently have things that weren't really offered. But Bill is right, as shown below from the 1973-79 MPC. Oddly enough, that same wheel, or at least that same part number, wasn't offered after that.

Anyway, I'll try to remember to put these pics, and the MPC listing, up in the documentation tomorrow. Thanks!

Gary, AKA "Gary fellow": Profile

Gary Lewis

Re: 15x8" Ford Wagon Wheels

Administrator

Ok Shaun, I got the pics up. Please check it out: Documentation/Driveline/Wheels.

Gary, AKA "Gary fellow": Profile

salans7

Re: 15x8" Ford Wagon Wheels

In reply to this post by Gary Lewis

Gary Lewis wrote

Yeah, the brochures frequently have things that weren't really offered. But Bill is right, as shown below from the 1973-79 MPC. Oddly enough, that same wheel, or at least that same part number, wasn't offered after that.

Anyway, I'll try to remember to put these pics, and the MPC listing, up in the documentation tomorrow. Thanks!

I'm almost certain that the removal of 15x8s was due to the 1979 Crude Oil crisis, which I'm sure also caused the fuel-sipping gear ratios in the Bullnose trucks. Anybody remember that? If I recall from reading up on it years ago, fuel prices lowered by the mid-80s, and that would explain why we didn't see another 15x8 until 1987.

Gary, I should still have pictures of my old 5-spoke (slotted) wheels if you would like to add them to the page as well. I see you already have the 10-hole versions there.

66gtk

Re: 15x8" Ford Wagon Wheels

I just unloaded a complete set of 4 of these 15x8 wagon wheels for $150 because I needed the space back in my garage. You can find these on Bricknose F150s and Broncos.

'83 F150 XL Shortbox California
302 (EEC-III), AOD, 3.55 - stock original drivetrain

Rembrant

Re: 15x8" Ford Wagon Wheels

Some refurb 15x8's showed up on Ebay yesterday or today as well, as I get alerts when they're listed.

1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold.
1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021.
1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995

LARIAT 85

Re: 15x8" Ford Wagon Wheels

In reply to this post by salans7

salans7 wrote

Here's the photos as promised. I took one from above, one from the side to show the "dish", one showing the width, one showing the backspacing, and one showing the stampings around the valve stem.

These are part number D8TZ-1015-D as they are 15x8 and not 15x6. According to Bill (NumberDummy), they were only offered in 78/79 and thus would not have come on a Bullnose truck, although the 1980 literature shows a few trucks with what looks to be 15x8 spoked wheels so that's confusing.

1980 Bronco brochure screen grab showing a 15x8. Later on in the brochure, you can see a Bronco with the 15x6 version of these wheels.

Interesting. Do you know what size tires Ford used with the deeper 15x8 wheels?

Lucille: 1985 Ford F150 XLT Lariat

*Colors: Dark Canyon Red exterior, Canyon Red interior
*Engine: 5.0, CompCams 31-230-3, "Thumper" E7 heads, Edelbrock Performer intake, Autolite 4100 carburetor, DuraSpark II ignition, Thorley Tri-Y headers, Flowmaster dual exhaust, H-pipe.
*Drivetrain: AOD transmission, 3.55 gears, 2wd.