FuzzFace2 Posted September 18, 2022 Share Posted September 18, 2022 Hey Dave, Thanks a lot for the reply. Sent from my iPhone There is a lot of what I would call misinformation out there. I personally have no idea about the type of paint. I was just going by the exterior paint code table on this site for a Canadian built truck and that is what it said for my codes. I probably read it wrong. I’m doing this a piece at a time because I have both fenders and the hood off. I would like to prime it with a spray can since it’s several small jobs. I intended to use the Duplicolor filler primer FP101 but I believe that is a lacquer based primer. Wouldn’t that lift the enamel paint?? I want to get this right so I don’t have to do it twice. What would you suggest I use for a primer?? Thanks, Jerry If the enamel paint was done not long ago then it may lift it but if it has been on the truck for say 5 years I would say you would be ok and not have lift issues. Do the first few coats light so it dries fast. When the coats a put on heavy / wet and they take longer to dry they have more of a chance to eat into the enamel and lift. I dod not know when the last enamel paint job was put on my truck and never gave it a thought about using lacquer primer and lifting. I did not get any lifting. Dave ---- Link to comment Share on other sites More sharing options...
Jerry Slagle Posted September 18, 2022 Author Share Posted September 18, 2022 Hey Dave, Thanks a lot for the reply. Sent from my iPhone There is a lot of what I would call misinformation out there. I personally have no idea about the type of paint. I was just going by the exterior paint code table on this site for a Canadian built truck and that is what it said for my codes. I probably read it wrong. I’m doing this a piece at a time because I have both fenders and the hood off. I would like to prime it with a spray can since it’s several small jobs. I intended to use the Duplicolor filler primer FP101 but I believe that is a lacquer based primer. Wouldn’t that lift the enamel paint?? I want to get this right so I don’t have to do it twice. What would you suggest I use for a primer?? Thanks, Jerry If the enamel paint was done not long ago then it may lift it but if it has been on the truck for say 5 years I would say you would be ok and not have lift issues. Do the first few coats light so it dries fast. When the coats a put on heavy / wet and they take longer to dry they have more of a chance to eat into the enamel and lift. I dod not know when the last enamel paint job was put on my truck and never gave it a thought about using lacquer primer and lifting. I did not get any lifting. Dave ---- Thanks man, The truck has been sitting outside for 15 years. The paint is original but is faded. I’m slowly making it mechanically sound but it sure needs some fresh paint. Thanks for the help!! Link to comment Share on other sites More sharing options...
Jerry Slagle Posted October 22, 2022 Author Share Posted October 22, 2022 Hey Dave, Thanks a lot for the reply. Sent from my iPhone There is a lot of what I would call misinformation out there. I personally have no idea about the type of paint. I was just going by the exterior paint code table on this site for a Canadian built truck and that is what it said for my codes. I probably read it wrong. I’m doing this a piece at a time because I have both fenders and the hood off. I would like to prime it with a spray can since it’s several small jobs. I intended to use the Duplicolor filler primer FP101 but I believe that is a lacquer based primer. Wouldn’t that lift the enamel paint?? I want to get this right so I don’t have to do it twice. What would you suggest I use for a primer?? Thanks, Jerry If the enamel paint was done not long ago then it may lift it but if it has been on the truck for say 5 years I would say you would be ok and not have lift issues. Do the first few coats light so it dries fast. When the coats a put on heavy / wet and they take longer to dry they have more of a chance to eat into the enamel and lift. I dod not know when the last enamel paint job was put on my truck and never gave it a thought about using lacquer primer and lifting. I did not get any lifting. Dave ---- Hey good morning y’all!! I know it’s been awhile but I have managed to move forward some. After retirement our motorcycle riding and camping seem to be taking precedent over this truck. The body work and primer is complete on the front half, now on to the bed. I cracked the windshield removing the trim so I just took all the glass out and set it aside for now. Link to comment Share on other sites More sharing options...
BigBrother-84 Posted October 22, 2022 Share Posted October 22, 2022 Hey good morning y’all!! I know it’s been awhile but I have managed to move forward some. After retirement our motorcycle riding and camping seem to be taking precedent over this truck. The body work and primer is complete on the front half, now on to the bed. I cracked the windshield removing the trim so I just took all the glass out and set it aside for now. Nice, body job is going well! Did you decide the final color yet? Link to comment Share on other sites More sharing options...
Jerry Slagle Posted October 22, 2022 Author Share Posted October 22, 2022 Nice, body job is going well! Did you decide the final color yet? Thanks, Right now I’m leaning towards Baltic Sea green and oyster white. The white for the cab top to offset some of that green. Maybe below the trim if that’s not enough. I saw this color combo on a 55 Ford at a rat rod show. Looked good together but I’ve changed my mind several times as I work on it and see what others have done. Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 22, 2022 Share Posted October 22, 2022 Thanks, Right now I’m leaning towards Baltic Sea green and oyster white. The white for the cab top to offset some of that green. Maybe below the trim if that’s not enough. I saw this color combo on a 55 Ford at a rat rod show. Looked good together but I’ve changed my mind several times as I work on it and see what others have done. Looks good, Jerry! On the windshield you'll probably find that the folks you call want to replace it with a later unit, but those have the VIN in a different spot than ours. So if you use one of those you can't read the VIN and that can cause problems when you sell the truck. DAHIK. I suspect it is illegal to do that, but windshield installers do it all the time if you let them. I wouldn't. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted October 22, 2022 Share Posted October 22, 2022 Looks good, Jerry! On the windshield you'll probably find that the folks you call want to replace it with a later unit, but those have the VIN in a different spot than ours. So if you use one of those you can't read the VIN and that can cause problems when you sell the truck. DAHIK. I suspect it is illegal to do that, but windshield installers do it all the time if you let them. I wouldn't. Maybe take a rubbing while the glass is out? Link to comment Share on other sites More sharing options...
Jerry Slagle Posted October 22, 2022 Author Share Posted October 22, 2022 Looks good, Jerry! On the windshield you'll probably find that the folks you call want to replace it with a later unit, but those have the VIN in a different spot than ours. So if you use one of those you can't read the VIN and that can cause problems when you sell the truck. DAHIK. I suspect it is illegal to do that, but windshield installers do it all the time if you let them. I wouldn't. Thanks Gary, I didn’t know that was a practice. Thanks for the heads up. I will surely keep an eye out for that. I really appreciate all the info y’all give to keep me straight!! Link to comment Share on other sites More sharing options...
Jerry Slagle Posted October 22, 2022 Author Share Posted October 22, 2022 Maybe take a rubbing while the glass is out? That’s for sure!! Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 22, 2022 Share Posted October 22, 2022 Thanks Gary, I didn’t know that was a practice. Thanks for the heads up. I will surely keep an eye out for that. I really appreciate all the info y’all give to keep me straight!! I didn't know about that practice when I had someone put a windshield in the '82 Explorer, and when I sold it to a guy in Kansas we ran into problems as the DOT guy couldn't see the VIN. Fortunately it was in a small town and my brother went there and pulled the dash pad. That and a mirror allowed them to read the VIN, but the DOT guy could have just said "that's illegal" and it would have been over. Since then I've seen many people on various forums and on Facebook find out that the windshield that was installed on their truck hides the VIN. The windshield companies like to stock the minimum of parts, so they appear to go with the later model ones where the VIN was moved. I think it is illegal for them to install one of those, but if you get stopped and the patrolman wants to check your VIN it will be your fault and not the installer's. And when you sell the truck the sale may fall through or be denied. Some people have found that the windshield places can get a windshield w/o the mask and that allows the VIN to be seen. So if you can't find the right one at least that might be an option. Link to comment Share on other sites More sharing options...
Recommended Posts