Danny G Posted October 31, 2020 Share Posted October 31, 2020 - deleted - Link to comment Share on other sites More sharing options...
FuzzFace2 Posted November 1, 2020 Share Posted November 1, 2020 Truck is going to stop really good with New Drums FL,FR New Rotors and pads FL, FR Sounds like a good plan on the brakes as I did the same thing to my truck as part of the rebuild. At first I used the booster & master from the parts truck, mine did not have power brakes. Once installed I found both bad and might have been the reason the parts truck was rolled on its roof? How are the Ebrake cables? At the wheels 1 of mine was broken and the other not hooked to anything so they were replaced. Front cables on both trucks were good so reused the best. Dave ---- Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted November 1, 2020 Share Posted November 1, 2020 Truck is going to stop really good with New Drums FL,FR New Rotors and pads FL, FR Sounds like a good plan on the brakes as I did the same thing to my truck as part of the rebuild. At first I used the booster & master from the parts truck, mine did not have power brakes. Once installed I found both bad and might have been the reason the parts truck was rolled on its roof? How are the Ebrake cables? At the wheels 1 of mine was broken and the other not hooked to anything so they were replaced. Front cables on both trucks were good so reused the best. Dave ---- The parking brake adjuster/equalizer beneath the driver commonly gets destroyed (up here in rust country) You might check that the threads are good and the crossbar sockets are solid. Link to comment Share on other sites More sharing options...
Sac79 Posted November 1, 2020 Share Posted November 1, 2020 LMC has a seat foam rebuild kit... Link to comment Share on other sites More sharing options...
Recommended Posts