ArdWrknTrk Posted December 4, 2017 Share Posted December 4, 2017 Dyn - Thanks for that. Gotta figure out what the engine is, but don't want to hijack this thread. The VIN should be there in the window, or on top of the passenger frame rail if the cab is missing. Link to comment Share on other sites More sharing options...
FuzzFace2 Posted December 10, 2017 Share Posted December 10, 2017 The VIN should be there in the window, or on top of the passenger frame rail if the cab is missing. There was not much to mine to dig thru. My parts truck only has 1 little rip so I went with it. Dave ---- Link to comment Share on other sites More sharing options...
PetesPonies Posted December 12, 2017 Author Share Posted December 12, 2017 There was not much to mine to dig thru. My parts truck only has 1 little rip so I went with it. Dave ---- Since I now have the seat belt grommets, I was able to finish the seat and get the bottom installed. Link to comment Share on other sites More sharing options...
Gary Lewis Posted December 12, 2017 Share Posted December 12, 2017 Since I now have the seat belt grommets, I was able to finish the seat and get the bottom installed. Well done! Link to comment Share on other sites More sharing options...
PetesPonies Posted December 13, 2017 Author Share Posted December 13, 2017 Well done! Can you see the door panels I have? and the grilles which are a separate piece? This goes back to when I got the truck. I need one of these grilles for the drivers panel. I'll get a specific pic, but you had asked for a shot of the panel since you didn't understand the style I had. Link to comment Share on other sites More sharing options...
Gary Lewis Posted December 13, 2017 Share Posted December 13, 2017 Can you see the door panels I have? and the grilles which are a separate piece? This goes back to when I got the truck. I need one of these grilles for the drivers panel. I'll get a specific pic, but you had asked for a shot of the panel since you didn't understand the style I had. I see the panel, but would like a close up of the grille itself. Not sure I know how to find one, but will help all I can. Back side might have some numbers that would help. Link to comment Share on other sites More sharing options...
FuzzFace2 Posted December 13, 2017 Share Posted December 13, 2017 I see the panel, but would like a close up of the grille itself. Not sure I know how to find one, but will help all I can. Back side might have some numbers that would help. Not to hi jack but anyone know what size the door speakers would be? Would like to get some for my project and want to keep an eye open for them. The seat bottom looks good Thanks Dave ---- Link to comment Share on other sites More sharing options...
PetesPonies Posted December 13, 2017 Author Share Posted December 13, 2017 Not to hi jack but anyone know what size the door speakers would be? Would like to get some for my project and want to keep an eye open for them. The seat bottom looks good Thanks Dave ---- I think Ford used 5 1/2s in the door. Sometimes you can get an aftermarket speaker slightly larger, that will fit. For example, a 6 1/2. This is because Ford speakers have a metal ring around that took up space. Link to comment Share on other sites More sharing options...
PetesPonies Posted December 15, 2017 Author Share Posted December 15, 2017 I think Ford used 5 1/2s in the door. Sometimes you can get an aftermarket speaker slightly larger, that will fit. For example, a 6 1/2. This is because Ford speakers have a metal ring around that took up space. Seat is finished. I still have not done the door panels. That is all that is left inside. But ,I will be pulling the left door to replace the hinge spring and fix some bad chips on the door. So a little bodywork and paint in order to get the door back on and the panel painted and reinstalled. Link to comment Share on other sites More sharing options...
Gary Lewis Posted December 15, 2017 Share Posted December 15, 2017 Seat is finished. I still have not done the door panels. That is all that is left inside. But ,I will be pulling the left door to replace the hinge spring and fix some bad chips on the door. So a little bodywork and paint in order to get the door back on and the panel painted and reinstalled. Looking good! That's going to be one clean and classy truck. Link to comment Share on other sites More sharing options...
Recommended Posts