Frogger2662 Posted August 30 Share Posted August 30 Need help find a thread on radiators. A while back I remember reading a thread on installing a later model radiator in our bullnoses. Cannot seem to find it. Any body have a link to the thread? Will the OBS radiators fit in Bullnoses? Link to comment Share on other sites More sharing options...
ratdude747 Posted August 30 Share Posted August 30 Yes, but you'll need to find/make new brackets since you're pre-1985. Look here in the site's documentation: https://www.garysgaragemahal.com/radiator-support.html (Tab "85+ Radiator in Earlier Support") I did this to my '84 as part of deer damage repair: https://forum.garysgaragemahal.com/Deer-killed-my-Bullnose-Mangled-the-front-tp103398p104572.html I've had all sorts of fun finding a radiator that doesn't leak... been through one Liland Global (Rockauto) and two Champions (all are full-aluminum welded)... currently I have an eBay one (also welded aluminum) and so far (a few weeks) it's been fine (other than the provided radiator cap being way too high pressure- but I supplied my own instead). If it's like my 4.9 you'll also need a new upper radiator hose as the inlet size is bigger on the later model radiator (3", same as the unchanged outlet size). My understanding is that other than being mirrored, the V8 and 4.9 radiators were/are identical. Not sure if fan shrouds transfer... since I had to replace mine. I used a fiber-reinforced plastic one off a 1990 F150; the stock 1984 fan fit no problem. Then again, I'm on a 4.9, so if you're still using a stock clutch fan, be prepared. Link to comment Share on other sites More sharing options...
Frogger2662 Posted August 30 Author Share Posted August 30 Thanks That is exactly what I read before. I have several donagr trucks nearby. Hopefully the cups are still there. Link to comment Share on other sites More sharing options...
mat in tn Posted August 31 Share Posted August 31 Thanks That is exactly what I read before. I have several donagr trucks nearby. Hopefully the cups are still there. if you are getting into modifying the core support to hold a later model radiator. take a few minutes first and look over the core support for rust. no sense in going to the effort of welding in supports if the core support is not near perfect. mostly look at the bottom of the core support in front of the battery tray. many times, that area is toast on a forty-year-old truck. Link to comment Share on other sites More sharing options...
Frogger2662 Posted August 31 Author Share Posted August 31 if you are getting into modifying the core support to hold a later model radiator. take a few minutes first and look over the core support for rust. no sense in going to the effort of welding in supports if the core support is not near perfect. mostly look at the bottom of the core support in front of the battery tray. many times, that area is toast on a forty-year-old truck. I had my core support out last year when I replaced the motor. Rust free. Very lucky for me frame and body are pretty much rust free. Link to comment Share on other sites More sharing options...
mat in tn Posted August 31 Share Posted August 31 I had my core support out last year when I replaced the motor. Rust free. Very lucky for me frame and body are pretty much rust free. that is excellent. if the donor has good supports and the spacing can be replicated easily then it's a great option. is the width of the opening the same? some earlier models had the 4-5" narrower opening in the core support along with a narrower radiator. normally the wider opening is wider on the driver side. Link to comment Share on other sites More sharing options...
Frogger2662 Posted August 31 Author Share Posted August 31 that is excellent. if the donor has good supports and the spacing can be replicated easily then it's a great option. is the width of the opening the same? some earlier models had the 4-5" narrower opening in the core support along with a narrower radiator. normally the wider opening is wider on the driver side. Going to check it out early next week. Thanks for the input. Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 31 Share Posted August 31 Going to check it out early next week. Thanks for the input. Check out our page at Documentation/Cooling Systems/Radiator Support and then the tab entitled 85+ Radiator in Earlier Support. Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 31 Share Posted August 31 Check out our page at Documentation/Cooling Systems/Radiator Support and then the tab entitled 85+ Radiator in Earlier Support. Oops, I missed Larry's post. He beat me by a mile. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted August 31 Share Posted August 31 Thanks That is exactly what I read before. I have several donagr trucks nearby. Hopefully the cups are still there. I don't know what your battery support looks like, but if you're at the junkyard getting the cups off a radiator support you're 99% of the way to having a 1987/on battery tray that sits on top of the plastic fender, and has a diagonal brace to the fender lip..... 💡 Link to comment Share on other sites More sharing options...
Recommended Posts