Frogger2662 Posted January 24 Share Posted January 24 Ready to install trans tunnel cover after aod to t5 swap. What should I use to seal the cover to floor pan? The old gasket is beyond reuse. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted January 24 Share Posted January 24 If you want it removable go to the weatherstrip section of your local big box and get CLOSED CELL neoprene gasket 1/4 thick by 1/2" Edit: Home Depot has it with the floor registers for some reason. If you don't care you can just RTV (silicone) it in place. Link to comment Share on other sites More sharing options...
Frogger2662 Posted January 24 Author Share Posted January 24 Thanks. I will go check out the neopreme gasket. Did not even thik about that. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted January 24 Share Posted January 24 Thanks. I will go check out the neopreme gasket. Did not even thik about that. Depending on how banged up your floor is, something like this should work. Link to comment Share on other sites More sharing options...
Frogger2662 Posted January 24 Author Share Posted January 24 The floor and cover are both in excellent condition. Going to do a little touch up priming and painting. Thanks Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted January 24 Share Posted January 24 The floor and cover are both in excellent condition. Going to do a little touch up priming and painting. Thanks Then 3/16 should be plenty thick enough. Link to comment Share on other sites More sharing options...
fryntrz Posted January 28 Share Posted January 28 I saw your other thread about the tunnel covers. What did you end up going with, and do you have any pictures of the install? I’m going 2wd C6 to TKO. I could cut a shifter hole but I’d rather find a tunnel cover for better access as needed. Link to comment Share on other sites More sharing options...
Frogger2662 Posted January 28 Author Share Posted January 28 I saw your other thread about the tunnel covers. What did you end up going with, and do you have any pictures of the install? I’m going 2wd C6 to TKO. I could cut a shifter hole but I’d rather find a tunnel cover for better access as needed. I ended up with the original manual trans cover. Truck was origionaly a standard that had been converted to an AOD. I am going back to a manual. Using a T5 with a foward s10 tailhousing conversion from Modern Driveline. The tran cover had some holes that I will need to patch but the metal is in good shape. Going to weld in patch panels to repair the holes. Having trouble with pics. Send me an email with you email address in it and I will send you some pics. Link to comment Share on other sites More sharing options...
Frogger2662 Posted January 28 Author Share Posted January 28 I ended up with the original manual trans cover. Truck was origionaly a standard that had been converted to an AOD. I am going back to a manual. Using a T5 with a foward s10 tailhousing conversion from Modern Driveline. The tran cover had some holes that I will need to patch but the metal is in good shape. Going to weld in patch panels to repair the holes. Having trouble with pics. Send me an email with you email address in it and I will send you some pics. Link to comment Share on other sites More sharing options...
Recommended Posts