ArdWrknTrk Posted January 24 Share Posted January 24 I know I asked Big Brother/Jeff in that discussion for his NAPA part number for the harness side of the DSII distributor connector. Jim, I looked everywhere and do not find my NAPA bill. I plan to stop there and check with the guy if he could find my history. It's all cool. I was just trying to make the point that I had been trying to track down that connector. I know it's odd, and I can't seem to find it anywhere, except that Painful Duraspark kit Link to comment Share on other sites More sharing options...
dirtymac Posted January 24 Share Posted January 24 No Look closely Gary has one at 6:00 and the white one is at about 8:00 I described it wrong but the little nub is what I was referring to. Could that key be ground or sanded off to fit? It looks like the rest of the plug is the same? I'm not saying that would be the best route, but just a potential route? Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted January 24 Share Posted January 24 I described it wrong but the little nub is what I was referring to. Could that key be ground or sanded off to fit? It looks like the rest of the plug is the same? I'm not saying that would be the best route, but just a potential route? This is what I've said many times before. But our documentarian is never happy with a temporary solution that simply works. Link to comment Share on other sites More sharing options...
dirtymac Posted January 24 Share Posted January 24 This is what I've said many times before. But our documentarian is never happy with a temporary solution that simply works. Alright. I think I understand the similarities and differences of those two plugs now. Since the Duraspark version is available, I think many folks could find a way to remove the nub that's in the wrong position. It might not be the cleanest option, but I wouldn't call it the worst option either. Link to comment Share on other sites More sharing options...
dirtymac Posted January 24 Share Posted January 24 Do we know what years and vehicles had the C610 plug? I want to be on the look out as I'm hitting up the junk yards. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted January 24 Share Posted January 24 Do we know what years and vehicles had the C610 plug? I want to be on the look out as I'm hitting up the junk yards. Gary gives a D3Ax- part number, sooooo 1973 - 1986 Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 24 Author Share Posted January 24 Gary gives a D3Ax- part number, sooooo 1973 - 1986 I'm not sure that the Duraspark connector will carry enough current. C610 carries all of the current going into the cab, and that yellow wire is probably a #12 if not a #10. And I think from what has been said that the only Duraspark connector that has been found is from Painless. Is that right? If so, what size wire can the terminals handle? Maybe on Friday, since I'm out tomorrow, I can measure a Duraspark connector to see if it is the same size. If so then trim its tabs off and see if it'll plug into the other half of C610. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted January 24 Share Posted January 24 I'm not sure that the Duraspark connector will carry enough current. C610 carries all of the current going into the cab, and that yellow wire is probably a #12 if not a #10. And I think from what has been said that the only Duraspark connector that has been found is from Painless. Is that right? If so, what size wire can the terminals handle? Maybe on Friday, since I'm out tomorrow, I can measure a Duraspark connector to see if it is the same size. If so then trim its tabs off and see if it'll plug into the other half of C610. The only DISTRIBUTOR connector (which has the odd key) is found in the Painful DSII kit. The regular module plugs are everywhere, all day long. Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 24 Author Share Posted January 24 The only DISTRIBUTOR connector (which has the odd key) is found in the Painful DSII kit. The regular module plugs are everywhere, all day long. Ok, my misunderstanding. Assuming I can get the Duraspark connector to plug into the other half of C610 then maybe I should buy one of the Duraspark connectors and see what size wire it can handle. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted January 24 Share Posted January 24 Ok, my misunderstanding. Assuming I can get the Duraspark connector to plug into the other half of C610 then maybe I should buy one of the Duraspark connectors and see what size wire it can handle. It's not going to go unless you file the key off. Link to comment Share on other sites More sharing options...
Recommended Posts