Bullnose Enthusiasts Forum › Marketplace › eBay, Craigslist, Facebook, & Kijiji Finds

VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Classic

List

Threaded

16 messages Options

Rembrant

VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Came across this old catalog in my morning "coffee searches"....

https://www.kijiji.ca/v-cars-other/belleville/vintage-1986-ford-dealer-standard-stock-catalog/1465873990?undefined

What exactly is this? Just a parts book, or something else?

1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold.
1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021.
1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995

Gary Lewis

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Administrator

That's a paper version of this: http://www.icsarchive.org/icsarchive-org/private/Ford%20Misc/2004-Standard-and-Utility-Parts-Catalog.pdf. I use it frequently to find out the dimensions of a bolt or nut, but the '86 version might have things that the 2004 doesn't.

If this was before the crash I'd ask if that's Canadian dollars. And, I'd ask what the shipping might be 'cross the border. But, today I think I'll pass.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Rembrant

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Gary Lewis wrote

If this was before the crash I'd ask if that's Canadian dollars. And, I'd ask what the shipping might be 'cross the border. But, today I think I'll pass.

That's $35 CDN, which right now is probably about $20 USD.

Gary Lewis

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Administrator

Oh no! I was afraid it might be something like that. I joined and sent him a message asking about a shipping guestimate and how low he can go.

Gary, AKA "Gary fellow": Profile

Rembrant

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Gary Lewis wrote

Oh no! I was afraid it might be something like that. I joined and sent him a message asking about a shipping guestimate and how low he can go.

Haha. I checked the current exchange rate and $35 CDN is $25 USD today. Shipping from Ontario to OK shouldn't be too bad.

Gary Lewis

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Administrator

He's responded that he'll get a guestimate on the shipping later today.

My hope is that this version of the S&UPC will have every fastener listed in the MPC for these trucks. The 2004 version doesn't, and I suspect Ford took parts out as they discontinued using them, just like they did in the MPC.

If so, this could be very helpful.

Gary, AKA "Gary fellow": Profile

Gary Lewis

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Administrator

Turns out the shipping is as much or more than the book. We got the price, inc shipping, agreed at $50 US but he balked on Paypal. Said "Actually Gary, i'm not comfortable with Paypal, have heard of problems with user fees etc. Why dont you either mail me a cheque for $50 US, or, better still, send a USPS money order made out for $50 US."

I don't see ratings on sellers on Kijiji, but maybe I'm missing it? If his ratings were good I'd push for "family and friends" on Paypal, but if he doesn't ship then I have no recourse.

I'm not going somewhere to get a money order. But might send a check. Looking at the USPS site I find that mail to Canada is $1.20. Do I just put that much in postage on and send it? Anyone know?

Gary, AKA "Gary fellow": Profile

Rembrant

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Gary Lewis wrote

Turns out the shipping is as much or more than the book. We got the price, inc shipping, agreed at $50 US but he balked on Paypal. Said "Actually Gary, i'm not comfortable with Paypal, have heard of problems with user fees etc. Why dont you either mail me a cheque for $50 US, or, better still, send a USPS money order made out for $50 US."

I don't see ratings on sellers on Kijiji, but maybe I'm missing it? If his ratings were good I'd push for "family and friends" on Paypal, but if he doesn't ship then I have no recourse.

I'm not going somewhere to get a money order. But might send a check. Looking at the USPS site I find that mail to Canada is $1.20. Do I just put that much in postage on and send it? Anyone know?

Gary,

I figured the shipping would be as much as the book itself, so that isn't a big surprise. I've shipped a lot of stuff to the US, so I'm used to it.

Sounds like he doesn't even use Paypal at all, or he would be used to it and understand the fee structure, which isn't much. If you want to Gary, ask him if he will accept an E-transfer from within Canada (email money transfer in CDN dollars). Tell him you have a friend that could send it.

There are no seller ratings that I'm aware of. I see he has 190 items listed, has been a member for 5 years, and has a 96% reply rating. The fact that he's selling a lot of car stuff and old manuals makes him seem legit. I'd say he's pretty safe. I've ordered a lot of stuff from random people on Kijiji and have never had any problems.

Otherwise yes, it's as simple as mailing a check. If it's a personal check, then just make sure it is clearly indicated or written that the amount is in USD.

If I can help in any way Gary, let me know.

Gary Lewis

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Administrator

Thanks for the offer. Let me see if I can get him to move into the 21st Century and take PayPal and let you know.

Gary, AKA "Gary fellow": Profile

Gary Lewis

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Administrator

He checked out Paypal and they told him that regardless of whether I used friends & family or not, there will be a cross-border fee.

So I'm sending him a check.

Gary, AKA "Gary fellow": Profile

Rembrant

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Gary Lewis wrote

He checked out Paypal and they told him that regardless of whether I used friends & family or not, there will be a cross-border fee.

So I'm sending him a check.

I had to go read up on this Gary, because I just received money from the US a few days ago for some parts, and there was no fee on my end for receiving the money. What there is a fee for is converting the USD to CDN (2.5-3.5%, depending on the currency), plus whatever buffer Paypal is using on the exchange itself (Probably 2% or so, like the banks do). Paypal does not let us withdraw the money in USD...it must be converted first. Anyway...I usually leave the USD in my Paypal account for using on Ebay, etc...and therefor pay no fees for the money. It you withdraw it however, then yes I guess you'll probably lose about 5% of it. I've never really paid much attention to the fees to be honest, but now I know...lol.

Please let us know how the book is when you finally get it;).

Cheers,

thefraze_1020

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Currently on my local Craigslist site is a last-year F100, with the uncommon 3.8L V-6. Truck looks in good shape and the price seems very reasonable. The only problem is that it's waaaaaayyyy up the Skagit River in the mountains, an hour out from I-5.

https://skagit.craigslist.org/cto/d/marblemount-83-ford-f100/7099487724.html

Cameron

1986 F-150 Base, 4x2, 4.9L I6, C6
1992 F-250 XLT, longbed extended cab, 4x4, 7.5L V8, ZF5 5-speed

Gary Lewis

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Administrator

Cameron - That truck is nice, and the price is good. But the 3.8L was notorious. No power and the MPG wasn't very good either. However, a Windsor will bolt in where it is.

And just fyi, tacking this onto a thread about the vintage catalog is not quite the right thing to do. I doubt Cory will care as I have the book on order, but you really should have started your own thread about a different topic like this truck.

Gary, AKA "Gary fellow": Profile

1986F150Six

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Administrator

Gary is correct, Cameron, but thank you for sharing! Very nice price for a potential daily driver!

thefraze_1020

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

In reply to this post by Gary Lewis

Oops sorry! I did not realize I put this here at the time. It was close to bed time. Now, I am rested and have a cup of coffee close by. So I see what happened. Sorry guys!

Cameron

1986 F-150 Base, 4x2, 4.9L I6, C6
1992 F-250 XLT, longbed extended cab, 4x4, 7.5L V8, ZF5 5-speed

Gary Lewis

Re: VINTAGE 1986 FORD DEALER STANDARD STOCK CATALOG

Administrator

No problem!

Gary, AKA "Gary fellow": Profile