Bullnose Enthusiasts Forum

Part # needed for Dana 60 LH thread Wheel Studs

Classic

List

Threaded

11 messages Options

Starliner

Part # needed for Dana 60 LH thread Wheel Studs

Does anyone out there know the Ford or Dorman part# for the 9/16 Wheel Studs on the left hand side of my Dana 60 read axle?
(Left hand threads).
Thanks.

JOE
1984 F250 HD 2wd auto w/air,
351W, 2bbl, Dana 60 3.73, no EEC

Angelo Voltura

Re: Part # needed for Dana 60 LH thread Wheel Studs

Dorman 610-228 if it has 3" wide rear brakes, 610-298 if it has 2.5" wide rear brakes.

1978 F150 351W
1979 F150 "410M"
1979 F100 302
1979 F250 400
1987 F150 300
1990 F150 302
1991 F150 300
1995 F150 (1985 clip swapped) 300
1997 F250 351W

Starliner

Re: Part # needed for Dana 60 LH thread Wheel Studs

Thank you so much!

JOE
1984 F250 HD 2wd auto w/air,
351W, 2bbl, Dana 60 3.73, no EEC

Angelo Voltura

Re: Part # needed for Dana 60 LH thread Wheel Studs

No problem, let us know how you make out with it!

1978 F150 351W
1979 F150 "410M"
1979 F100 302
1979 F250 400
1987 F150 300
1990 F150 302
1991 F150 300
1995 F150 (1985 clip swapped) 300
1997 F250 351W

myrl883

Re: Part # needed for Dana 60 LH thread Wheel Studs

I'll try to remember you in the morning and get an OE Ford number. I love digging through the old "parts lists".

Ford Parts Monkey since 1985
1981 F100 Flareside - Black, 302-4V Roller/AOD
1986 F150 Flareside - Medium Fire Red 302/AOD
1989 F150 Standard Cab 4x4 - Dk Shadow Blue 302/AOD
1993 F350 4x4 Crew Cab - 7.3 IDI/ZF-5
I think it's a sickness...

ArdWrknTrk

Re: Part # needed for Dana 60 LH thread Wheel Studs

Administrator

The OE numbers are right there on the Dorman application page.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Gary Lewis

Re: Part # needed for Dana 60 LH thread Wheel Studs

Administrator

I'm late to the party and answered the question in the other thread. But, for continuity:

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

myrl883

Re: Part # needed for Dana 60 LH thread Wheel Studs

Ford number was (obsolete now) DOTZ-1119-A.

ArdWrknTrk

Re: Part # needed for Dana 60 LH thread Wheel Studs

Administrator

Looks like neither of those Dorman numbers are good.

The first is 1107-A and the second is only 1/2-20.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

myrl883

Re: Part # needed for Dana 60 LH thread Wheel Studs

Got a NAPA store in your area? Looks like their number is 6411362 - that's using their cross reference from the Ford part number.

Starliner

Re: Part # needed for Dana 60 LH thread Wheel Studs

I just ordered from ebay for 30 bucks shipped. Done!

JOE
1984 F250 HD 2wd auto w/air,
351W, 2bbl, Dana 60 3.73, no EEC