Bullnose Enthusiasts Forum › Marketplace › eBay, Craigslist, Facebook, & Kijiji Finds

NOS 300/4.9L exhaust manifold heat shroud - D9TZ 9A603-A or B?

Classic

List

Threaded

6 messages Options

1986F150Six

NOS 300/4.9L exhaust manifold heat shroud - D9TZ 9A603-A or B?

Administrator

https://www.ebay.com/itm/1980-1989-F100-350-NOS-air-cleaner-heat-shroud-300-6-cylinder-D9TZ-9A603-A-or-B/132558204465?hash=item1edd15ae31:g:4boAAOSwUchZ~13-&vxp=mtr

Ford F834

Re: NOS 300/4.9L exhaust manifold heat shroud - D9TZ 9A603-A or B?

Administrator

I just picked one of these up at the junkyard as I want to put the intake back to stock. I remember the outlet on mine to be at a different angle, so I wonder if I found the right one? I will have to take a closer look at what I bought...

SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2

1986F150Six

Re: NOS 300/4.9L exhaust manifold heat shroud - D9TZ 9A603-A or B?

Administrator

Jonathan, I believe this one is for the engines which had the air cleaner remotely mounted on the driver's side. [???]

rthenry145

Re: NOS 300/4.9L exhaust manifold heat shroud - D9TZ 9A603-A or B?

I bought this and a bracket off ebay and it mounted right up nicely after i found the right 3 nuts from my supply of extras.

https://www.ebay.com/itm/D3AZ9C670B-Lot-of-2-Ford-bracket-shroud-supports-Galaxie/162489867770?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

heat shroud mounting bracket

Thanks for posting these "finds". I doubt I would have ran across this Mustang,Maverick, Comet part on my own!!!!!

heat shroud to air cleaner

'81 Custom F-100 I6, Style Side, A/C

1986F150Six

Re: NOS 300/4.9L exhaust manifold heat shroud - D9TZ 9A603-A or B?

Administrator

It takes all of us working together to keep this hobby alive!

Gary Lewis

Re: NOS 300/4.9L exhaust manifold heat shroud - D9TZ 9A603-A or B?

Administrator

Yep. And we have a good mix of capabilities and interests here on the Bullnose Forum to do just that.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI