Bullnose Enthusiasts Forum › Marketplace › eBay, Craigslist, Facebook, & Kijiji Finds

Lower rag joint steering shaft - used

Classic

List

Threaded

11 messages Options

1986F150Six

Lower rag joint steering shaft - used

Administrator

https://www.ebay.com/itm/125596115638?hash=item1d3e1ca2b6:g:FKYAAOSwv75jZR-G&amdata=enc%3AAQAHAAAAkLSUKgenmPfheKdsINEk%2FN9FColqeL7%2FXD78C4n2o7NklkSg7Tm42DNuYixJzfniUrFq11bEDznIujBVygpp4RPh%2FK4Xd%2Faxvdq6Mi%2FvBeMRQFyKb8cMs4xKnEiynzovvG2D4tI0x72xteXhpkg%2ByaXlzB6ScYiAIXr13RO7Vcu8Zv0mFXZ7PeZi%2BVkj3BC9Fg%3D%3D%7Ctkp%3ABk9SR4LdvNGJYQ

Gary Lewis

Re: Lower rag joint steering shaft - used

Administrator

Advert says "1987-1991". Jim - Do they fit a Bullnose? What did you do to make one?

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

ArdWrknTrk

Re: Lower rag joint steering shaft - used

Administrator

Look at the upper end. I think how it attaches to the shaft coming from the column differs from a Bullnose.
Slides over and bolts through instead of sliding up inside.

Yep, my '87 had a rag joint.
I replaced it twice.....

I then bought the telescoping double universal joint lower shaft from a 2014 F-150 and welded the ends from our style shaft onto it.
I was careful to get the clocking of both ends right.

It's raining right now, or I'd go grab a picture.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Rembrant

Re: Lower rag joint steering shaft - used

In reply to this post by Gary Lewis

Gary Lewis wrote

Advert says "1987-1991". Jim - Do they fit a Bullnose? What did you do to make one?

Yes they do. Direct swap. I installed one in my '84 Flareside. I believe John just installed one recently as well.

1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold.
1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021.
1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995

ArdWrknTrk

Re: Lower rag joint steering shaft - used

Administrator

Here's some pics to show what I did to eliminate the rag joint.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Gary Lewis

Re: Lower rag joint steering shaft - used

Administrator

Thanks, guys.

Jim - You wrote this up, right? I haven't found it and we need to have it where it is easily found.

Gary, AKA "Gary fellow": Profile

ArdWrknTrk

Re: Lower rag joint steering shaft - used

Administrator

I'm sure I posted pictures and discussed it when I was making the change.
I doubt I created a topic about it.

The lower cross shaped shaft with universal joints on the ends was ~$20 delivered (eBay, I can't find it in my purchase history)
All you need to know is keep the splined ends in the same orientation they were on the rag joint shaft and wrap the universals with a wet rag so they can't overheat when you weld it (I Vee'd it out deep to assure 100% penetration)

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Gary Lewis

Re: Lower rag joint steering shaft - used

Administrator

Let me search a bit more...

Gary, AKA "Gary fellow": Profile

Gary Lewis

Re: Lower rag joint steering shaft - used

Administrator

Jim - I need some help in finding your pics. You started a thread called Rag Joint Elimination and a few posts in you said:

ArdWrknTrk wrote

Well, Cory that's good to hear.

Depending on delivery you may or may not be following the adventure this weekend.

You'd ordered some parts and were planning to make the shaft. But that's where that thread basically ends as you didn't come back to it. Perhaps that's when the transfer case bit you?

So I went back through the log of your posts and found the one above on Page 312. But looking at later and later posts I can't come up with where you put the shaft together.

What am I missing?

Gary, AKA "Gary fellow": Profile

ArdWrknTrk

Re: Lower rag joint steering shaft - used

Administrator

Perhaps... nothing, and I'm the one who got too involved or distracted to follow up.

At this point I'll have to go back through Google Photos to see if I can find the pic's of lining it up and welding it together. (because there is a new-ish SD card in my phone)
This might be a good test for Lens to see if the AI can pick out similar photos in my gallery.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Gary Lewis

Re: Lower rag joint steering shaft - used

Administrator

Thanks.

Gary, AKA "Gary fellow": Profile