Bullnose Enthusiasts Forum › Marketplace › eBay, Craigslist, Facebook, & Kijiji Finds

Insulator / absorber [E0TZ-1000396-A] - NOS

Classic

List

Threaded

9 messages Options

1986F150Six

Insulator / absorber [E0TZ-1000396-A] - NOS

Administrator

This is for a pair.

https://www.ebay.com/itm/155394513983?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=155394513983&targetid=1645685073288&device=c&mktype=&googleloc=9012676&poi=&campaignid=16730423415&mkgroupid=135815925780&rlsatarget=pla-1645685073288&abcId=9300841&merchantid=6296724&gclid=Cj0KCQjw2cWgBhDYARIsALggUhrWh9kIXCCJKBYnDbS79pNQ94oTLD41wlgg-3czgSd5gUg-gXz1b7saAvpREALw_wcB

1986F150Six

Re: Insulator / absorber [E0TZ-1000396-A] - NOS

Administrator

Or, pay more for only one.

https://www.fordpartsgiant.com/parts/ford-insulator_eotz-1000396-a.html

1986F150Six

Re: Insulator / absorber [E0TZ-1000396-A] - NOS

Administrator

Or, at Jeff's Bronco.

https://shop.broncograveyard.com/1980-1997-Ford-Bronco-and-F-Series-Truck-Radiator-Core-Support-Upper-Body-Mount-Sleeve/productinfo/331020/

delco1946

Re: Insulator / absorber [E0TZ-1000396-A] - NOS

Is there anyway to know what these insulate? They seem too thin for cab. I recently tried getting transmission mounts and no one seems to sell the type I need....which look like several-inch diameter rubber disks, kinda like these (in profile).

Christopher in Portland Or. 1981 F250 Ranger XLT 4x4 trailer special 351M, and auto C6

salans7

Re: Insulator / absorber [E0TZ-1000396-A] - NOS

This post was updated on .

delco1946 wrote

Is there anyway to know what these insulate? They seem too thin for cab. I recently tried getting transmission mounts and no one seems to sell the type I need....which look like several-inch diameter rubber disks, kinda like these (in profile).

I believe these are for the front radiator support due to the hex shape.

Some time ago, Gary did a microanalysis on the 80-84 transmission mounts, and if I remember correctly, he was able to find something that worked. It was either on his dad's truck, or the truck he called "Rusty". I asked him about it he recently, but he doesn't recall, and I barely remember it as well, but I do know it would have been on FTE. I need to dig for it one of these days because this question comes up alot.

*EDIT* I found a post where Gary briefly played around with bushings for the transmission crossmember. I'll put it below. Not sure if this is what I'm thinking of, but it does touch on the subject.

Gary Lewis wrote

Shaun - I didn't find an exact match in what extra body bushings I have, but I got pretty close. First, here are the stock bushings under that top piece in your pic. And in the middle is an LMC #40-2012 front cab mount upper.

But, as you can see in this pic, the LMC mount is not quite 1/2" shorter than the factory mount.

Here's a shot from the top showing that the bushings are about the same diameter.

And the piece below looks just like the LMC bottom piece, which is 40-2032. I have 4 of those and would confirm they are the same - but mine are in the PC oven at the moment so I'll do that tomorrow. However, either the lower piece screws into the upper piece or they are rusted together, which is quite probable.

So, we might be able to get there but will just have to shim the mount by about 1/2". However, we have no way of knowing how the rubber compares between the stock and those from LMC. Thoughts?

Gary Lewis

Re: Insulator / absorber [E0TZ-1000396-A] - NOS

Administrator

Shaun - There's this thread on FTE. But it points back to this website here.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

BigBrother-84

Re: Insulator / absorber [E0TZ-1000396-A] - NOS

In reply to this post by delco1946

NPD says «ABSORBER, CAB MOUNT, #1, UPPER».

This diagram seems to confirm...

Jeff / 1984 F350 Crew Cab 4x4/5.8L w351 4V/ T18/ D50 4.10 front/ 8' bed.
Restored 2019-2022.
Nicknamed «Big Brother 1984», due to its soooo-looong shape & nod to George Orwell's 1984 famous novel.

salans7

Re: Insulator / absorber [E0TZ-1000396-A] - NOS

In reply to this post by Gary Lewis

Gary Lewis wrote

Shaun - There's this thread on FTE. But it points back to this website here.

Gary, that looks like it's for the body mounts.

The snippet I posted was from a similar thread from 2014. Here was what Bill posted when I mentioned the 1980-1984 transmission crossmember bushings.

NumberDummy wrote

What's to figure out? All you need is the parts catalog...

These are engine rear support rubber insulators, not body rubber absorbers (bushings), and were used on ALL (depending on the applications/years):

1980/89 F150/350 & Bronco 300/302/351M/351W/400/460 & 6.9L/7.3L 4WD's.

2) E1TZ-6E039-A .. Insulator-Rear Support-Upper / Obsolete ~ 220 available NOS

2) E1TZ-6E039-B .. Insulator-Rear Support-Lower / Obsolete ~ 1 available NOS

BigBrother-84

Re: Insulator / absorber [E0TZ-1000396-A] - NOS

In reply to this post by delco1946

delco1946 wrote

I recently tried getting transmission mounts and no one seems to sell the type I need.

Christopher, are you looking for the crossmember/transmission insulators I discussed in this thread?

Jeff / 1984 F350 Crew Cab 4x4/5.8L w351 4V/ T18/ D50 4.10 front/ 8' bed.
Restored 2019-2022.
Nicknamed «Big Brother 1984», due to its soooo-looong shape & nod to George Orwell's 1984 famous novel.