Bullnose Enthusiasts Forum › NEW MEMBERS START HERE

Hello From Tennessee

Classic

List

Threaded

29 messages Options

Mastermind Worksaws

Hello From Tennessee

Hello fellow Bullnosers. I am the proud owner of three F350 Bulls. One is a cab and chassis 351W truck, one is a diesel 4wd Dually. Yeah....I know, 4wd F350s never came with a dually bed. It is actually a F250, and an F350 that someone grafted together. On that truck, I want to swap out the 7.3 for a 460. I need help on that.....

Wanted to post some pictures, but ain't dealing with resizing.

Randy

Gary Lewis

Re: Hello From Tennessee

Administrator

What part of Tenn? We could put you on the map.

As for the pics, they'll autorotate if you don't use the resizing buttons. But the max file size is 1Mb, so if your pics are bigger than that use the Big resizing button.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

ArdWrknTrk

Re: Hello From Tennessee

Administrator

In reply to this post by Mastermind Worksaws

Welcome!

C&C Dually trucks came 4wd.

Resizing is easy. Use the sizing tool in the right hand column of the drop-down (Big Size)

Are you a Chimp or a Bonobo????

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

grumpin

Re: Hello From Tennessee

In reply to this post by Mastermind Worksaws

Welcome!

Dane
1986 F250HD SC XLT Lariat 4x4 460 C6-Sold
1992 Bronco XLT 4x4 351W E4OD
1998 GMC Sierra SLE K1500 350 4L60E
Arizona

Mastermind Worksaws

Re: Hello From Tennessee

In reply to this post by Gary Lewis

I'm in a little place called Banner Springs Gary.

Mastermind Worksaws

Re: Hello From Tennessee

In reply to this post by ArdWrknTrk

I'm a monkey....with a gun.

It is sorta kinda my business logo.

mastermindsaws.com

Gary Lewis

Re: Hello From Tennessee

Administrator

In reply to this post by Mastermind Worksaws

You are now on the map, Randy. And I know roughly where you are. One set of our kids used to live in Nashville and the other in Delaware so we'd leave Nashville early in the morning, stop at the Starbucks in Cookeville, and motor on.

Gary, AKA "Gary fellow": Profile

mat in tn

Re: Hello From Tennessee

In reply to this post by Mastermind Worksaws

give us a little larger idea. never heard of banner springs. I have travelled most of the state. lived in bartlett and Nashville. Nashville for most of my life. no longer a Tennessean though.

Mastermind Worksaws

Re: Hello From Tennessee

In reply to this post by ArdWrknTrk

Gary Lewis

Re: Hello From Tennessee

Administrator

You got the pic posting figured out.

I like the engine. Nice and clean!

Gary, AKA "Gary fellow": Profile

Mastermind Worksaws

Re: Hello From Tennessee

In reply to this post by Mastermind Worksaws

ArdWrknTrk

Re: Hello From Tennessee

Administrator

In reply to this post by Mastermind Worksaws

Monkey's have tails.
Great apes: gibbons, gorillas, orangutan's etc... don't.
Even though some (Orangutan's esp) don't really walk on the ground.

I'm old enough to remember the original Planet of the Apes.

I'll have to check out your site.
I like building saws. 😉

Edit: I watch an older guy (Walt) on YouTube
Hilltopsawshop.
He has fettled* a lot of "kits" in his day, on top of maintaining local cutters equipment.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Mastermind Worksaws

Re: Hello From Tennessee

I'm wanting to chit can the IDI in a 4wd truck. It's a T19 transmission I believe. Hydraulic clutch. What bellhousing would I need to put a 460 in it?

Mastermind Worksaws

Re: Hello From Tennessee

In reply to this post by ArdWrknTrk

Walt is a good guy. Another fella named Bob is in some videos with him once in awhile. Bob and I have done a lot of business together. He retired a few years ago from saw work....at least for the general public.

ArdWrknTrk

Re: Hello From Tennessee

Administrator

In reply to this post by Mastermind Worksaws

A 460 bell housing.
I sold mine when I went Zf-5 in 2011.

Walt can wander a bit.

But he's a railfan, so he's got to be a good guy.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

ArdWrknTrk

Re: Hello From Tennessee

Administrator

In reply to this post by Mastermind Worksaws

E4TZ 7505-B is the part number you want.
Paradoxically, the number ON a Ford part is NOT the part number, it is an engineering number.

Look for one marked E4TA 7500-DA, or E7TA 7500-BA
The "stud" (7b602) is the mushroom post the clutch throw out arm pivots on....

Edit to add: they are rare as hens teeth!

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Mastermind Worksaws

Re: Hello From Tennessee

I'm beginning to think I'd be better off building a C6 transmission instead...

ArdWrknTrk

Re: Hello From Tennessee

Administrator

C6's are really good at turning gasoline into hot fluid.

They're bulletproof, but no good for economy

Your choice....

Remember, if you go that way you'll need a new steering column and instrument cluster.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Mastermind Worksaws

Re: Hello From Tennessee

In reply to this post by Mastermind Worksaws

I'm thinking about the ZF-5 now.....is that transmission compatible with the transfer case in my truck?

ArdWrknTrk

Re: Hello From Tennessee

Administrator

Yes.
I have a 4wd Zf-5 in my T-19 truck

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.