Five made, 3 spoken for...
1986 F-150 Flareside 4x4, 351, 4-v, ZF5 speed. AC, Cruise, Tilt, Slider, Digital clock, Radio, Lariat seat, Pwr doors/locks
|
Administrator
|
Well done, Ron!
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
In reply to this post by reamer
By any chance do you have a picture of this installed? I’m interested but if I get around to using my flareside bed it won’t be with the stock bumper and I’m thinking this bracket may place the license plate behind the bumper I want to use... also did you name a price for these?
SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD
STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2 |
Hi Ford
$35 includes shipping.
1986 F-150 Flareside 4x4, 351, 4-v, ZF5 speed. AC, Cruise, Tilt, Slider, Digital clock, Radio, Lariat seat, Pwr doors/locks
|
In reply to this post by Ford F834
Hi Ford
$35 includes shipping. The bracket bolts to the lip on the bed, so any bumper can be used. Designed to be lower than the bumper for that reason. Let me know if you need a better photo..
1986 F-150 Flareside 4x4, 351, 4-v, ZF5 speed. AC, Cruise, Tilt, Slider, Digital clock, Radio, Lariat seat, Pwr doors/locks
|
Administrator
|
Thanks Ron, let me do some checking regarding my bumper placement.
The one I want to use was hand made by a guy at US Forest Service where my dad worked. It was the district ranger’s special order 1966 flareside. My dad got the truck at auction and owned it until rust cancer claimed it. He kept the bumper and had it put on his 1968 F250. I recently sold the truck but I kept the bumper. It has some sentimental value, and it is a darn good bumper. Does not look like much in the picture, but it’s very well made, solid, but not overkill. It belongs on a flareside. Of course I need to change it to fit the wider bullnose frame. I’m just worried the bumper will cover the license plate using the correct bracket.
SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD
STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2 |
It can always be modified...
1986 F-150 Flareside 4x4, 351, 4-v, ZF5 speed. AC, Cruise, Tilt, Slider, Digital clock, Radio, Lariat seat, Pwr doors/locks
|
Hi Ron I'm interested in a bracket and I have a PM
|
Administrator
|
Darin - How quickly do you need it? Perhaps have Ron ship it to me and you pick it up in Sept?
Ron - We'd talked about displaying things, or at least pictures of things, that you make at the show. Might this be one of them?
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Great Idea! getting it to Gary would be best.
1986 F-150 Flareside 4x4, 351, 4-v, ZF5 speed. AC, Cruise, Tilt, Slider, Digital clock, Radio, Lariat seat, Pwr doors/locks
|
That would be fine by me guys I'm in know rush for it just let me know how to pay for it and the shipping
Thanks Darin |
Got the bracket to day and about an hour later had it test fitted to the truck.
Best picture I could get as I cannot get it outside at this time, rear wheelsareoff. Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1 81 F100 style side 300 six/SROD parts truck -RIP http://cars.grantskingdom1.com/index.php/1981-Ford-F100 |
Administrator
|
Looks like it bolted right on and belongs.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Ron did a great job making it. After I drilled the 2 mounting holes it bolt right on and looks good. I had to pull the plate off my Gremlin as I could not find any of my others to show it mounted. After I drilled the mounting holes I got thinking I should have used a nut cert on the bracket. When I mount it for good I will use security bolts and lock nuts if the nut certs don't fit as I seen posted a member had one stolen off his truck. Now I have to find the plate light but I have time to look for one and hear they are not too hard to find as they were used on other models. Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1 81 F100 style side 300 six/SROD parts truck -RIP http://cars.grantskingdom1.com/index.php/1981-Ford-F100 |
Administrator
|
Jein. (Ask Jochen.) The same socket may have been used, but the wiring harness it was attached to was different. You can see that on the new page I created just for you: Electrical/Lighting/Tag Lights. But in the HELP section at the parts store they may have that socket and you can graft it into your wiring.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
I believe the Ford Granada used the same light assembly.
1986 F-150 Flareside 4x4, 351, 4-v, ZF5 speed. AC, Cruise, Tilt, Slider, Digital clock, Radio, Lariat seat, Pwr doors/locks
|
That's what I seen posted also. As long as the light has the housing & socket the pig tail I am not worried as I have to graft the rear tail light wiring to the rear Style Side truck harness anyway. Gary, thanks I will check it out. Then again some other light may catch my eye that I can use LOL Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1 81 F100 style side 300 six/SROD parts truck -RIP http://cars.grantskingdom1.com/index.php/1981-Ford-F100 |
In reply to this post by reamer
Gary,
Would you have the full part number for the housing 13550? That socket I can get at the parts store. I used 2 of them on my custom dash on my Javelin. Thanks Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1 81 F100 style side 300 six/SROD parts truck -RIP http://cars.grantskingdom1.com/index.php/1981-Ford-F100 |
Hey Dave if you find out what fits and if they are not to hard find could you grab one for us as well and I could fix you up for the cost of the parts and your time Cheers Darin
|
Administrator
|
In reply to this post by FuzzFace2
Dave - Isn't the part number shown on the Part #'s tab?
Darin - If Dave figures it out maybe I can pick them up or or them in here and have them with the bracket when you get here.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Edit this page |