Bullnose Enthusiasts Forum › Marketplace › For Sale, Trade, or Free To A Good Home

0.020" (0.5mm) pinion shims 2" (50mm) ID, 2 3/4(70mm) OD

Classic

List

Threaded

6 messages Options

ArdWrknTrk

0.020" (0.5mm) pinion shims 2" (50mm) ID, 2 3/4(70mm) OD

Administrator

I had to buy a pack of 10, so I have 9 shims left that fit 10.25 & 10.5 Sterling differentials.

They are flat and light, so I can just stick it in an envelope USPS.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Gary Lewis

Re: 0.020" (0.5mm) pinion shims 2" (50mm) ID, 2 3/4(70mm) OD

Administrator

Good offer. Hope rear end is going together.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

ArdWrknTrk

Re: 0.020" (0.5mm) pinion shims 2" (50mm) ID, 2 3/4(70mm) OD

Administrator

The truck shop opens Monday at 8.

Once I get the bearings pressed on I can set the new carrier side to side and reassemble.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Gary Lewis

Re: 0.020" (0.5mm) pinion shims 2" (50mm) ID, 2 3/4(70mm) OD

Administrator

Gary, AKA "Gary fellow": Profile

ArdWrknTrk

Re: 0.020" (0.5mm) pinion shims 2" (50mm) ID, 2 3/4(70mm) OD

Administrator

I have some other pack of shims (0.060" total) that my cheap brother bought, who knows why....

Anyway, they're not for a 10.25.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

ArdWrknTrk

Re: 0.020" (0.5mm) pinion shims 2" (50mm) ID, 2 3/4(70mm) OD

Administrator

I bought ONE 3 pack of oil slingers

Send me your street address and I will put one of the two 'spares' in an envelope to your doorstep.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.