"Bullnose" lawn tractor project

classic Classic list List threaded Threaded
Assigned: 85lebaront2 at priority
 3 
(Normal)
39 messages Options
12
Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

85lebaront2
Administrator
On my Kohler twins, the difference between an MV16 and an MV18 is the cylinder heads, the MV18 has a smaller chamber in the heads raising the compression enough to gain 2 hp.
Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

Ifitaintbroke
Those are ohv though, right?
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

85lebaront2
Administrator
No, they are flat head. The OHV Kohler twins are V-twins, I have a CV22S (24hp). You may be thinking of the OMC engines Cushman used in their golf carts and scooters. They were OHV opposed twins.
Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

Ifitaintbroke
I guess it just depends on how the chamber is shaped. On the Briggs, there really isn't much room. I'll try to get some pics after I clean them up.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

Ifitaintbroke
Got the engine together and in. Runs great, but I only made it about 6 feet before the belt snapped into 2 PIECES. I've never done that before. After a new belt I should be tractoring again! Also when the belt broke it smashed into the choke cable, ruining it. So I need another one of those too.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

Gary Lewis
Administrator
One step forward and two back is not progress.  
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

Ifitaintbroke
Well it runs so that's progress! It didn't run when the engine was out. But it's totally my fault the belt snapped. You know those little wire holder thingies that keep the belt on the pulleys? Yeah I missed one of those. Or 2. Or 10.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

Gary Lewis
Administrator
10?  Yikes!  Would be hard to get a belt on.  
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

Ifitaintbroke
Well I'm exaggerating a bit there. But when I pushed that clutch in.......I thought the engine blew up. Twas loud. I've seen a lot of broken and worn out v belts, but this is the first one I've ever seen the broke into 2 pieces. Maybe I'll have one in stock at work. Probably just wishful thinking.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

85lebaront2
Administrator
Word of advice, use a Lawn and Garden belt, preferably a Kevlar one. Automotive ones are not designed to be used for a clutch, and other than a Corvair, aren't real good for multiple twists and turns.

Bill
Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

Ifitaintbroke
That's what it had. I couldn't find a 92.5" so I'm going to try a 92 and a 93.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

85lebaront2
Administrator
I order a lot of mine from a company named V-belt supply. That is a Craftsman GT16 correct? I believe you said you have the manual for it. I have a cross reference from Sears PNs to belt sizes if it will help.

It only took me 25 years to finally find the correct belt sizes for my GTV16.
Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

Ifitaintbroke
It is a GT18. I've got the manual saved somewhere but I'll have to find it.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

85lebaront2
Administrator
If you give me the Sears model number, I should be able to find the manual if I don't have a copy already. It should be a 917.XXXXX format.
Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

FuzzFace2
What about an industrial belt from say Grainger?

When I worked at the hospital all the fan units used industrial belts.
They come in different V widths to fit the shives.
The fan units could run 2 to 6 belts and any over 3 they were mat belts as even matched sets did not fit right.
Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100
Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

Ifitaintbroke
In reply to this post by 85lebaront2
917.255910.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

Ifitaintbroke
In reply to this post by FuzzFace2
I just picked up regular ones from Tractor Supply. We'll see how it goes.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

85lebaront2
Administrator
Ok, my go to source is V-belt Global Supply and here is a screenshot of the page with their belts for the 10342N Sears belt:
Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

Reply | Threaded
Open this post in threaded view
|

Re: "Bullnose" lawn tractor project

Ifitaintbroke
I'll bet it's that 91 inch. 92 seems a little long. Thanks for the help!
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
12