Wiring harness [E2TZ-9A350-C] - NOS

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Wiring harness [E2TZ-9A350-C] - NOS

1986F150Six
Administrator
Reply | Threaded
Open this post in threaded view
|

Re: Wiring harness [E2TZ-9A350-C] - NOS

Gary Lewis
Administrator
That's interesting. It should be Kit "H" from the TSB shown below, which fits a truck with a 351M or 400. And the description for each kit is: "It consists of an in-tank fuel pump, vapor separator, and a vapor return system, along with related fuel lines and electrical wiring and devices."

But I don't see a pump vapor separator in the picture. So I'm guessing that the kit isn't complete. And there's a note about that: "Initial supplies of the dual tank kits will not include part of the modification. Therefore, the dealer technician will be required to apply an instruction label to the dash of the vehicle and to fill out a postcard (both included in the kit) which will enable Ford Motor Company to complete the modification at a later date when the required part becomes available." So, is this one of the "initial" kits?

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Wiring harness [E2TZ-9A350-C] - NOS

1986F150Six
Administrator
SOLD!