Bullnose Enthusiasts Forum

Questions on door speaker sizing

Classic

List

Threaded

51 messages Options

123

Rembrant

Re: Questions on door speaker sizing

Gary Lewis wrote

Question Mark & The Mysterians belting out 96 Tears ...

lol, now there's one I haven't heard in a long LONG time. The band came and went before I was even born, but I grew up on AM radio and they played a lot of 60's stuff. I don't think I've heard that song in 25 years.

1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold.
1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021.
1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995

Gary Lewis

Re: Questions on door speaker sizing

Administrator

I'm listening to 60's On 6 on SiriusXM, and that was playing.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Danny G

Re: Questions on door speaker sizing

I don't think any fancy wireing will be needed if I get a unit with a center out.

Current plan is
Drivers. Center. Passenger
Front 6.5"3way. 5x7. 6.5"3way
Rear. 4"leftch 4"UHF. 4"VHF. 4"rightch

1986 F-150|Standard Cab|4x2|300Six|C6Transmission w/3.08 rear|Name:TBD
2021 Ranger XLT Super Crew

Gary Lewis

Re: Questions on door speaker sizing

Administrator

Should work nicely.

Gary, AKA "Gary fellow": Profile

kramttocs

Re: Questions on door speaker sizing

Administrator

In reply to this post by Gary Lewis

Gary Lewis wrote

Scott - Do you read lips?

Not when I do this

@TheScatch - keep us updated on what HU you go with and how it works out. The capabilities of them now are crazy.

Scott
'Camano' 1986 F250 Supercab XLT Lariat 460/C6
'Chanute' 1980 F350 C&C 400/NP 435 - Gin Pole

But there ain't nothin' wrong with the radio

Danny G

Re: Questions on door speaker sizing

I'm pretty set on trying to find a retro style radio with modern options like bluetooth to go into the truck.

I have been eyeballing this guy for some time:

It does not come with a face plate, and my truck has a DIN not the two holes in the bezel. So I will have to fab up a ABS plate of my own.

https://www.classiccarstereos.com/1980-1986-ford-truck-radio-usa-630.html

1986 F-150|Standard Cab|4x2|300Six|C6Transmission w/3.08 rear|Name:TBD
2021 Ranger XLT Super Crew

Gary Lewis

Re: Questions on door speaker sizing

Administrator

I'm surprised that they are marketing it as a "1980-1986 Ford Truck Radio" when there are two very different openings and mounting systems used: 1980 - 84; and 1985 & 6. I think I'd be pretty upset if I bought it for an '85 or '6 thinking it would fit right in.

Have you checked to see how big the faceplate on it is? If I remember correctly the original 1980 - 84 radio faceplates were too tall to fit in the DIN opening of '85-6. I can check that later if you want.

You could go to the earlier bezel with the larger opening, but if you have a burled wood bezel on the instrument panel you are stuck as there isn't a burled wood radio bezel with the larger opening.

Gary, AKA "Gary fellow": Profile

Danny G

Re: Questions on door speaker sizing

Gary Lewis wrote

I'm surprised that they are marketing it as a "1980-1986 Ford Truck Radio" when there are two very different openings and mounting systems used: 1980 - 84; and 1985 & 6. I think I'd be pretty upset if I bought it for an '85 or '6 thinking it would fit right in.

Have you checked to see how big the faceplate on it is? If I remember correctly the original 1980 - 84 radio faceplates were too tall to fit in the DIN opening of '85-6. I can check that later if you want.

You could go to the earlier bezel with the larger opening, but if you have a burled wood bezel on the instrument panel you are stuck as there isn't a burled wood radio bezel with the larger opening.

You know I didn't think about this until I was making that last post. I need to check to see what the dimensions are. I had emailed the company ages ago asking if they sold a faceplate with it. They responded no it attaches to the bezel. I sent them a picture showing them that not all trucks had that set up and a lot of bezels are din style.

I was under the impression I could make my own face-plate for this to fit into a DIN opening. Now I need to go check dimensions.

1986 F-150|Standard Cab|4x2|300Six|C6Transmission w/3.08 rear|Name:TBD
2021 Ranger XLT Super Crew

Danny G

Re: Questions on door speaker sizing

OK so a din is 2 1/8" x 7 1/8"

The stats on this retro stereo (I'm a sucker for retro Ford Scripting)

knob to knob 5 3/4"
Opening height says 2 5/8"

BUT

According to the paperwork the USA-630 has Chassis dimensions of:
2" x 7 3/4"

So sounds like a wash on a din unless you mounted it from the back only and did a custom installation. They have some din units but not that Ford script.

Also found a link for a custom sized one.

1986 F-150|Standard Cab|4x2|300Six|C6Transmission w/3.08 rear|Name:TBD
2021 Ranger XLT Super Crew

Gary Lewis

Re: Questions on door speaker sizing

Administrator

Yes, Houston, I think there's a problem. Here are my measurements:

1981 radio: Nose is 2 15/16" high and 4 1/2" wide. And knobs are on 5 3/4" centers.

1981 bezel opening: 2 1/2" x 4 1/8"

DIN bezel opening: 2 3/16" x 7"

Ne'er the twain shall meet.

As said, I'd be pretty upset if I bought that for an '85 or '6. It is not advertised correctly.

Gary, AKA "Gary fellow": Profile

Danny G

Re: Questions on door speaker sizing

I have contacted them about their custom sizing as well.

I am open to suggestions for units. I just find the odd pioneer/jvc multi-color stereo a turn off when put in older vehicles, it breaks the flow so to speak.

1986 F-150|Standard Cab|4x2|300Six|C6Transmission w/3.08 rear|Name:TBD
2021 Ranger XLT Super Crew

123