Bullnose Enthusiasts Forum

New Coolant/Washer Reservoir?

Classic

List

Threaded

13 messages Options

Gary Lewis

New Coolant/Washer Reservoir?

Administrator

I had someone ask me where to get a new '85/86 coolant/washer reservoir, and I couldn't find one at the normal places. Many say they have it but what they show in the pic is the 1980 - 84 unit where the hose goes in a hole in the top.

But I thought someone on here posted that he'd recently bought one, and I cannot find the post. Help! Do you know where to find one? Do you know where that post is?

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Machspeed

Re: New Coolant/Washer Reservoir?

Administrator

Seems I saw that same post, Gary. Doesn't seem like it was all that long ago either. Didn't mark it as I was able to satisfactorily clean mine up. Would be nice to confirm that it available, though.

John

"Blackie" - 1986 F150 4x4 - Mildly warmed over 351W HO - Original owner

grumpin

Re: New Coolant/Washer Reservoir?

In reply to this post by Gary Lewis

Isn’t this it?

https://www.dennis-carpenter.com/trucks/exterior/windshield-wipers/d8bz-17618-a-ww-reservoir-wo-pump-w?utm_source=google&utm_medium=cpc&utm_campaign=11654029601&utm_content=116098449809&utm_term=&gclid=EAIaIQobChMIzpP4_tyV9AIVwQp9Ch1FrwGMEAQYAyABEgIvZ_D_BwE

Edit: found this in a google search. Found it on the website, third page in the radiator section. Under cooling system.

Dane
1986 F250HD SC XLT Lariat 4x4 460 C6-Sold
1992 Bronco XLT 4x4 351W E4OD
1998 GMC Sierra SLE K1500 350 4L60E
Arizona

Machspeed

Re: New Coolant/Washer Reservoir?

Administrator

No, that's the older style, albeit a good looking re-pop, though.

John

"Blackie" - 1986 F150 4x4 - Mildly warmed over 351W HO - Original owner

grumpin

Re: New Coolant/Washer Reservoir?

Oh, thought that was too easy!

Dane
1986 F250HD SC XLT Lariat 4x4 460 C6-Sold
1992 Bronco XLT 4x4 351W E4OD
1998 GMC Sierra SLE K1500 350 4L60E
Arizona

Gary Lewis

Re: New Coolant/Washer Reservoir?

Administrator

In reply to this post by grumpin

Dane - The one at Dennis Carpenter, shown below, appears to be the 1980-84 version where the hose goes in via the hole at the top. What that person is looking for is the 1985-86 version where the hose goes onto a fitting at the bottom.

And yes, we have a page on them, and you can see the part number of E5TZ 17618-A, but I can't find one to purchase.

Gary, AKA "Gary fellow": Profile

grumpin

Re: New Coolant/Washer Reservoir?

That’s right. Must be junkyard only now.

On the recent one you mentioned, I remember that, (for what that’s worth!), weren’t they able to clean up the one they had?

Dane
1986 F250HD SC XLT Lariat 4x4 460 C6-Sold
1992 Bronco XLT 4x4 351W E4OD
1998 GMC Sierra SLE K1500 350 4L60E
Arizona

Frogger2662

Re: New Coolant/Washer Reservoir?

In reply to this post by Gary Lewis

I installed one from a 87-96 F150. Had to a little adapting but looks and works good. Picked it up off of ebay.

1984 F150 Flareside
1992 stock 5.0 with edelbrock 4 barrel.
Dual exhaust.

Gary Lewis

Re: New Coolant/Washer Reservoir?

Administrator

John cleaned his up. Not sure who else did.

As for the later version, I put one of those in Big Blue since they are sealed at the top and I was losing coolant on the rough and steep Jeep roads. Fixed that problem. But it did take some adapting - especially since mine is on the passenger's side.

Gary, AKA "Gary fellow": Profile

LARIAT 85

Re: New Coolant/Washer Reservoir?

In reply to this post by Frogger2662

What sort of adapting did you have to do to make it fit?

Lucille: 1985 Ford F150 XLT Lariat

*Colors: Dark Canyon Red exterior, Canyon Red interior
*Engine: 5.0, CompCams 31-230-3, "Thumper" E7 heads, Edelbrock Performer intake, Autolite 4100 carburetor, DuraSpark II ignition, Thorley Tri-Y headers, Flowmaster dual exhaust, H-pipe.
*Drivetrain: AOD transmission, 3.55 gears, 2wd.

Gary Lewis

Re: New Coolant/Washer Reservoir?

Administrator

I know the question is for Frogger, and I'm interested in what he tells us. But I found that the tabs that hold the reservoir to the fender are about 1" farther apart than on the Bullnose reservoirs. So I had to make a whole new bracket for mine as I have it mounted on the passenger's fender.

Gary, AKA "Gary fellow": Profile

Frogger2662

Re: New Coolant/Washer Reservoir?

In reply to this post by LARIAT 85

It has been a couple of years since i installed it. Going by memory the top holes were further apart. Had to drill a new hole for the mounting location on the core support side. I used a 1/4-20 nutzert. There is a mounting tab on the bottom of the resoiver that had to have a small mod to. Do not remember what it was.

1984 F150 Flareside
1992 stock 5.0 with edelbrock 4 barrel.
Dual exhaust.

Gary Lewis

Re: New Coolant/Washer Reservoir?

Administrator

Since I have the '85 and '90 reservoirs I thought I'd get some pics and measurements.

First, a view of the bottom with various things called out:

Red ovals show where the pin/tab is that locates the reservoir on the bottom

Green arrows show where the inlets are from the radiator

Blue arrows show where the discharges are for the washer pump

Next, an end view:

Last, the measurements, and the one on the right shows the holes in the tabs are ~1" farther apart on the later reservoir:

Gary, AKA "Gary fellow": Profile