Search Forum
Need help with part number
Locked
Need help with part number
 
|
I'm looking for the frame rail bracket for the front sway bar on a Bronco and some F150s. I thought I knew the part number but what I just got in the mail is not right. I circled the part in the diagram (this is from the front sway bar diagram on the forum). Does anyone know the part number?
LittleBeefy aka Chad
“Dot Doitall”: 1984 Bronco XLT 460 (C8VE), Edelbrock Pro-Flo 4, ZF5, NP205, D44HP solid axle, 4.56 urban assault vehicle "Bebe": 2022 Bronco Badlands 2dr 2.7l, Sasquatch, Iconic Silver, Black Marine-grade interior, hard-top "Celeste": 1979 Porsche 928 4.5l K-jet, 5-sp, S4/GTS brakes, LSD, Pasha interior |
Re: Need help with part number
Administrator
|
This is probably going to be a multi-part response.
You've circled what looks to be base part number 5493, but here's what the catalog says for that: 5493 INSULATOR (STABILIZER BAR)-Refer to group 5482 or 5A772. Clearly 5493 is the wrong part. But also in that circle is "5D485 or 5486" with 5486 having a black dot in front of it which, I think, means discontinued. 5D486 is Bracket (Front Stabilizer Bar) and 5486 is Bracket (Stabilizer Bar). So here are the listings for both of those:     
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Re: Need help with part number
Administrator
|
Re: Need help with part number
|
Administrator
|
Re: Need help with part number
|
|
In reply to this post by 1986F150Six
I need the E1TZ parts for my Bronco, not the E0TZ parts on eBay. The E0TZ brackets mount the isolators onto a curved crossmember. I bought them by mistake and can't use them.
 I guess I needed the mount for the HD suspension, even though the Bronco does not have the HD suspension. SMDH. I got E1TZ-5D485-A from Green's for $6. I'm still looking for E1TZ-5D485-B but I have a couple of lines on one. BTW, Gary - I believe the "dot" in that picture indicates 2WD part number and the triangle indicates 4WD part number. Not related to superseded part numbers.
LittleBeefy aka Chad
“Dot Doitall”: 1984 Bronco XLT 460 (C8VE), Edelbrock Pro-Flo 4, ZF5, NP205, D44HP solid axle, 4.56 urban assault vehicle "Bebe": 2022 Bronco Badlands 2dr 2.7l, Sasquatch, Iconic Silver, Black Marine-grade interior, hard-top "Celeste": 1979 Porsche 928 4.5l K-jet, 5-sp, S4/GTS brakes, LSD, Pasha interior |
Re: Need help with part number
|
Administrator
|
Re: Need help with part number
|
|
Re: Need help with part number
|
The Star and Dot, among other marks, can mean anything. It depends on the notation for them on the specific page you are looking at.
Like the Mounds and/or Almond Joy commercial.. Sometimes it means discontinued, other times it don't. 
Truck: 1981 F-150 Explorer / Engine: 300-6 California MCU Feedback System / Trans: T-18 - 4 speed / 2.75 Ford Rear Axle Open Diff.
|
Re: Need help with part number
|
|
Good to know it can vary, but on that page with the explosion I showed:
LittleBeefy aka Chad
“Dot Doitall”: 1984 Bronco XLT 460 (C8VE), Edelbrock Pro-Flo 4, ZF5, NP205, D44HP solid axle, 4.56 urban assault vehicle "Bebe": 2022 Bronco Badlands 2dr 2.7l, Sasquatch, Iconic Silver, Black Marine-grade interior, hard-top "Celeste": 1979 Porsche 928 4.5l K-jet, 5-sp, S4/GTS brakes, LSD, Pasha interior |
Re: Need help with part number
|
Administrator
|
I'd missed that originally, Chad. So I'm glad you pointed it out. As Ralph said it varies by page, and I just missed it on that page.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|