Bullnose Enthusiasts Forum

Help with FI "y" pipe fitment on 85 300 I6

Classic

List

Threaded

23 messages Options

Tyler

Help with FI "y" pipe fitment on 85 300 I6

I am having some delayed success with installing the FI "y" pipe from Walker...It seems like the O2 sensor bung portion is bent too aggressively. I have an 85 and have exhaust manifolds from an 88. I ordered the "y" pipe for an 88 from Rock auto.
Have any of you found difficulty in accomplishing this? I had to cut off 4" from the end in order to clear the crossmember/trans mount. I know it looks rough, but I didn't bend this whatsoever.

I am about to file a return/replacement with Rock Auto depending on feedback from you guys.
Thanks in advance!

1985 F150 4x4 SB 300 I6: Comp 268 cam, '68 240 head, Offy DP, FI manifolds, Holley Sniper 2300, DUI street/strip distributor, BW T-18, Tuff Country 4" suspension lift, Yukon Offroad hubs + front and rear Duragrip LSD 3.73 ratio, 33-12.5/15s

Gear Vendors overdrive unit on order.

Oklahoma boy livin in Washington State. Retired submarine MMNCM (Nuclear Machinist's Mate, Master Chief)

Gary Lewis

Re: Help with FI "y" pipe fitment on 85 300 I6

Administrator

That's a pretty ugly bend! Sure to restrict the flow the way it is pinched and rippled. But I haven't been around the 300 nor its exhaust so can't say what other brands look like.

And, I'll caution that while I buy a lot of things from Rock Auto, their claims and returns rules aren't all that friendly. Just a heads-up.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Tyler

Re: Help with FI "y" pipe fitment on 85 300 I6

Thank you for the input. I'll keep my fingers crossed.

On Wed, Dec 23, 2020, 10:56 AM Gary Lewis [via Bullnose Enthusiasts Forum] <[hidden email]> wrote:

That's a pretty ugly bend! Sure to restrict the flow the way it is pinched and rippled. But I haven't been around the 300 nor its exhaust so can't say what other brands look like.

And, I'll caution that while I buy a lot of things from Rock Auto, their claims and returns rules aren't all that friendly. Just a heads-up.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker in front & 10.25 Spicer/Trutrac in back, & EEC-V MAF/SEFI

If you reply to this email, your message will be added to the discussion below:
http://forum.garysgaragemahal.com/Help-with-FI-y-pipe-fitment-on-85-300-I6-tp83363p83371.html

To unsubscribe from Help with FI "y" pipe fitment on 85 300 I6, click here.
NAML

Gary Lewis

Re: Help with FI "y" pipe fitment on 85 300 I6

Administrator

Others will have input, but we are in a very SLOW time on the forum right now with Christmas around the corner. Lots of guys with the 300 six, but many of them are busy with family at the moment.

Gary, AKA "Gary fellow": Profile

Tyler

Re: Help with FI "y" pipe fitment on 85 300 I6

I completely understand.

Sac79

Re: Help with FI "y" pipe fitment on 85 300 I6

Annoyingly I don't have any pics of the Y-pipe outside the truck or capturing that bend next to the bung. I bought mine from Advanced Auto and I did not have to cut anything. I suspect yours got bent in transit or packing.

Best picture I have. I have since wrapped that part of the pipe, so a picture now won't tell us much either.

Rob

Eddy Myrtle '84 F150 300-6, Offenhauser C series intake, Edelbrock 1404(500cfm manual choke), EFI exhaust manifold, HEI dizzy, custom Painless harness, NP 435, NP 208, D44, 8.8"/3.08, 1.5" leveling coils, 265/75/16 tires.
Toyopet (Daily driver) '86 Toyota Pickup

Tyler

Re: Help with FI "y" pipe fitment on 85 300 I6

Sac79 wrote

Annoyingly I don't have any pics of the Y-pipe outside the truck or capturing that bend next to the bung. I bought mine from Advanced Auto and I did not have to cut anything. I suspect yours got bent in transit or packing.

Best picture I have. I have since wrapped that part of the pipe, so a picture now won't tell us much either.

Thanks for the feedback. What brand and for what year model did you purchase through Advance?
VERY NICE frame-off setup, BTW...

Sac79

Re: Help with FI "y" pipe fitment on 85 300 I6

The part is Walker #45166. It appears it's no longer available... Bummer. It was $62 delivered to my door.

It you're already thinking about getting one made custom, go that route. I might eventually do the same. The short arm of the 'Y' is poorly welded at an extreme angle, which causes a definite restriction. The reviews said as much, but for the money I'm not complaining. Is the one from Rockauto similar? I imagine it's the same part.

Tyler

Re: Help with FI "y" pipe fitment on 85 300 I6

Yes. Mine is the same but comes with the cat. They no longer just sell the y pipe. I still think mine is bent incorrectly but instead of buying another I'm just going to get a tow from a buddy when I'm ready to fire it up and have the whole exhaust built at a local shop. Then I can just drive it home. Ideally. Ideally...

FuzzFace2

Re: Help with FI "y" pipe fitment on 85 300 I6

Tyler wrote

Yes. Mine is the same but comes with the cat. They no longer just sell the
y pipe. I still think mine is bent incorrectly but instead of buying
another I'm just going to get a tow from a buddy when I'm ready to fire it
up and have the whole exhaust built at a local shop. Then I can just drive
it home. Ideally. Ideally...

I am not using the cat and yes that is the only way I could get the pipe w/cat.
I also don't remember needing to cut it to clear the cross member.

Dave ----

Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100

Tyler

Re: Help with FI "y" pipe fitment on 85 300 I6

I looked at getting another pipe from Advance Auto but they wanted $500 !! Ended up ordering from Amazon.com and got it for the same price as Rock Auto but with free shipping and free returns (with shipping free if I return it, too).

So the saga is to be continued for when this thing comes in next week. Then it'll be time to piece together a permanent exhaust if the new y pipe fits.

Thanks for all the help! Soon, I hope to get the Sniper system up and complete the writeup so I can be considered a "contributor"

Gary Lewis

Re: Help with FI "y" pipe fitment on 85 300 I6

Administrator

Here's hoping it fits nicely!

As for contributing, you already have. You contributed greatly on making my days on Wednesday and Thursday. Finding out you are "family" was a hoot!

What you probably don't know is that we are really good friends with Joe and Ann. Joe worked on Fords for years and has forgotten more than I'll ever know about them. Ann is heavily into quilting, as is my wife, Janey. So we've bonded with them very strongly.

Gary, AKA "Gary fellow": Profile

Rusty_S85

Re: Help with FI "y" pipe fitment on 85 300 I6

In reply to this post by Gary Lewis

Gary Lewis wrote

That's a pretty ugly bend! Sure to restrict the flow the way it is pinched and rippled. But I haven't been around the 300 nor its exhaust so can't say what other brands look like.

And, I'll caution that while I buy a lot of things from Rock Auto, their claims and returns rules aren't all that friendly. Just a heads-up.

Thats how walker products look.

The tail pipe I got for my '82 truck was not only a 2" tail pipe when it should have been 2 1/4" like the 351W but it had the same crunched down rippled bends. Same as my walker Y pipe had the same crunched down rippled bends. I did end up getting a newer tail pipe in the correct 2 1/4" for a 351W truck for like a '83-86 with a different hanger but this brand I cant remember off the top of my head but it has more OE like bends where the pipe is crunched down some but its a smooth crunched down radius bend not a accordian wrinkled bend.

Big reason why I want to go aftermarket on the Y pipe for my truck cause Walker makes some real junky exhaust pipes for our trucks. Down side is Magnaflow which makes Y pipes for our trucks has since started only selling California Compliant versions with a pre cat in the Y and the converter or you can go with this other brand Bassani that does nice mandrel bent Y pipes but they only sell the Y pipe in a 3" single exhaust flavor. big reason why I cant decide on my truck Y pipe wise. Seems like everything from Walker Y pipe/Tail pipe wise is made either the wrong size, horrible crinkled bends, or they are not bent right to where they dont fit. I did get a off road Y pipe from Jegs for our trucks but its in multiple pieces and has a clamp under the oil pan which I dont want and know you can never weld that joint up and make it look nice.

On the returns, I honestly never returned my exhaust pieces to them as it would cost me more to pay return shipping than what the items cost in the first place. So I will either sell them on ebay to make some of my money back or toss them.

"Old Blue" - '56 Fairlane Town Sedan - 292-4V, Ford-O-Matic transmission, 3.22:1
'63 Belair 2dr sdn - 283-4V, Powerglide transmission, 4.56:1
'78 Cougar XR7 - 351-2V, FMX transmission, 2.75:1 9inch
"Bruno" - '82 F150 Flareside - 302-2V, C6 transmission, 2.75:1 9inch, 31x10.50-15 BFG KO2

1986F150Six

Re: Help with FI "y" pipe fitment on 85 300 I6

Administrator

Have you looked at the BOSAL 0794032?

https://www.rockauto.com/en/moreinfo.php?pk=1472952

It looks like Rock Auto has it for about $232 plus shipping.

Tyler

Re: Help with FI "y" pipe fitment on 85 300 I6

I haven't. Sort of got locked in on the Walker for no specific reason. Ended up ordering from Amazon with free return shipping so I'll see how it goes. Thanks for the recommendation, if this doesn't work, I'll look at BOSAL.

On Mon, Dec 28, 2020, 3:48 PM 1986F150Six [via Bullnose Enthusiasts Forum] <[hidden email]> wrote:

Have you looked at the BOSAL 0794032?

https://www.rockauto.com/en/moreinfo.php?pk=1472952

It looks like Rock Auto has it for about $232 plus shipping.

If you reply to this email, your message will be added to the discussion below:
http://forum.garysgaragemahal.com/Help-with-FI-y-pipe-fitment-on-85-300-I6-tp83363p83770.html

To unsubscribe from Help with FI "y" pipe fitment on 85 300 I6, click here.
NAML

Tyler

Re: Help with FI "y" pipe fitment on 85 300 I6

New pipe came in today. First one was clearly bent incorrectly. I did my best to install but it looks like I'll have to remove the ol' Offy and the new FI exhaust manifolds in order to set the pipe in place. This is my last resort.

Here's the inside of the rear portion inlet. All I have is some long files to get in there and open that up. Once I know it fits.

Gary Lewis

Re: Help with FI "y" pipe fitment on 85 300 I6

Administrator

You sure are getting poor quality pipes! But at least you got one that looks like it'll fit. Hope you can get it cleaned up.

Gary, AKA "Gary fellow": Profile

Tyler

Re: Help with FI "y" pipe fitment on 85 300 I6

Gary Lewis wrote

You sure are getting poor quality pipes! But at least you got one that looks like it'll fit. Hope you can get it cleaned up.

Bought a dremel extension and went through 4 grinding wheels. 2 hours later... I think I got it cleaned up.
AND, it FITS!

old55pete

Re: Help with FI "y" pipe fitment on 85 300 I6

That's just wrong to have to go through that much work to get a NEW part to work correctly. Welcome to working on 30 plus year old pickups.

Steve
86 Bronco, XLT, 5.0 EFI, EEC IV, AOD, IFS, limited slip front and rear, 3.08 gears, Tilt steering, factory AC

Gary Lewis

Re: Help with FI "y" pipe fitment on 85 300 I6

Administrator

In reply to this post by Tyler

That looks GREAT! Well done!

Gary, AKA "Gary fellow": Profile