Bullnose Enthusiasts Forum

Flareside: OEM Bed Wood pictures

Classic

List

Threaded

51 messages Options

123

Rembrant

Re: Flareside: OEM Bed Wood pictures

Check out the bed floor in this 1986 Flareside on Ebay. You NEVER see them in original condition like this...clearly the topper has preserved it like that. Truck has a little bit of rust on the corners here and there, but overall is really solid looking for the age of it. That Flareside bed is in great condition.

https://www.ebay.com/itm/203050160279

1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold.
1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021.
1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995

SCFlareside

Re: Flareside: OEM Bed Wood pictures

Thanks for sharing! Just wow.

I've reached out to the owner to see if we can get a few more pics of the bed and interior for posterity

1985 Flareside 4x4, Silver, 302, AOD, BFG Mud 33x12.50s. California truck with 140k original miles :) (and slowly going up)

1977 F250 4x4 Highboy, Dec '76 production. NP435 4 Speed, NP205, 4:10s. Military 36.5s

Gary Lewis

Re: Flareside: OEM Bed Wood pictures

Administrator

In reply to this post by Rembrant

Nice truck! And probably the best bed I've seen in many decades.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Rembrant

Re: Flareside: OEM Bed Wood pictures

I stopped to look at this old ‘86 Flareside today and wouldn’t ya know the old girl still has the factory plywood floor still intact. It was in quite good condition underneath but pretty rotten on top. Truck has been sitting for a decade or so unfortunately.

Gary Lewis

Re: Flareside: OEM Bed Wood pictures

Administrator

And???????

Gary, AKA "Gary fellow": Profile

FuzzFace2

Re: Flareside: OEM Bed Wood pictures

In bed tie downs and looks to had a frame mounted trailer hitch.
If you were to get that one you would just need a white one to have blue / red / white LOL
Dave ----

Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100

Rembrant

Re: Flareside: OEM Bed Wood pictures

In reply to this post by Gary Lewis

Gary Lewis wrote

And???????

Haha no news yet Gary. Overall it’s pretty crusty. Surprisingly intact but not sure the juice is worth the squeeze. Maybe. I’m going to sleep on it.

Gary Lewis

Re: Flareside: OEM Bed Wood pictures

Administrator

Ok. But you have us "in suspenders" as Dad would have said.

Gary, AKA "Gary fellow": Profile

ArdWrknTrk

Re: Flareside: OEM Bed Wood pictures

Administrator

In reply to this post by FuzzFace2

Dave, they "don't need no stinkin blue" in Canoodia! 😉

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

86 1/2 Brutus

Re: Flareside: OEM Bed Wood pictures

In reply to this post by ArdWrknTrk

Looks great. you really did a fine job on that.

Nick and George
1986 1/2 F150 XLT Lariat 4X2 300 Six - C6 - 3:08 in a 8.8 - Fully Loaded - 8 Foot Box
Owned since new

Rembrant

Re: Flareside: OEM Bed Wood pictures

In reply to this post by ArdWrknTrk

ArdWrknTrk wrote

Dave, they "don't need no stinkin blue" in Canoodia! 😉

Haha only red and white, EH!!

123