Correct radio knobs for 1981?

classic Classic list List threaded Threaded
13 messages Options
Reply | Threaded
Open this post in threaded view
|

Correct radio knobs for 1981?

Ford F834
Administrator
I have noticed that there are two different styles of knobs used on the older knob and shaft radios. One is chamfered, the other is more rounded. I kind of remember my other 1981 F250 to have the more rounded knobs, and it was fairly original inside. However almost all that I see are the chamfered style which has an engineering number starting in D7 (1977). The rounded one has an engineering number starting in E0 (1980). So which knob is "correct" for 1981?
SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2
Reply | Threaded
Open this post in threaded view
|

Re: Correct radio knobs for 1981?

Gary Lewis
Administrator
Here's the original radio for Dad's truck:




And here's a close-up of one of the knobs:

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Correct radio knobs for 1981?

Ford F834
Administrator
Thanks Gary, those are the knobs I usually see on 80-84 (77-79 also), but sometimes I see the round ones. I remember an FTE thread where someone was chasing down some rare radio knobs and wondered if it was a "thing". I picked up a stock radio at the junkyard today for the 1981 and was wondering which knobs to use. It came from a 1984 LTD and does not look exactly right, but it was cheap and will fill the hole 'for now'.
SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2
Reply | Threaded
Open this post in threaded view
|

Re: Correct radio knobs for 1981?

Gary Lewis
Administrator
If you want the knobs off this one they are yours, you'll have to come and get them. 😈

By the way, if I had the whole of the engineering/ID # I could search the catalog to see if they are there. But I believe they come with the radio and aren't available separately.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Correct radio knobs for 1981?

Ford F834
Administrator
Thanks for the offer Gary! I do happen to have an extra set of the "chamfered" style knobs in my junk stash. The radio I bought looks identical to the one you took out of Dad's truck except for the AM/FM slider isn't chrome w/"stereo" written on it and the balance slider knob isn't chrome. It feels much lighter than the one I bought on eBay for my diesel build, but that one has the cassette player.

Regarding the knobs, if anyone else ends up reading this and wanting the engineering numbers, this is what I see (marked on the back of the inner knob, outer has no number):

Chamfered knobs:
D70A-18A932-AA

Rounded knobs:
E0AF-18A932-AB chrome
E2ZF-18A932-AA black
SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2
Reply | Threaded
Open this post in threaded view
|

Re: Correct radio knobs for 1981?

Gary Lewis
Administrator
There is no reference to 18A932 in the catalog.  That usually comes when some kind person at Ford added it to the Description field of the catalog, but that was infrequent.

However, I did find this, which says the 1980-84's had one set of knobs, and the 1985-86's had a different one.  And, that the early knob was designed in 1977, so was probably used from 1977 to 1984.  And that fits with the D7OA ID number.  But, the E5AZ doesn't match with the E0 or E2 number.

Perhaps this is a question for Bill/Numberdummy?

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Correct radio knobs for 1981?

Ford F834
Administrator
The 1985 knob would be much different, as it was a DIN radio with knobs. They were considerably smaller. Keep in mind that the rounded knobs that come on my recent purchase were in a LTD, and the knobs in my previous 1981 truck could have come from anywhere. Perhaps they were different in vans, cars etc.,?
SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2
Reply | Threaded
Open this post in threaded view
|

Re: Correct radio knobs for 1981?

Gary Lewis
Administrator
Looks like the chamfered knobs were also used in:

1977 Torino, LTD II, and Thunderbird
1978 Torino & LTD II, the Thunderbird ex the Diamond Jubilee, and the Fiesta
1979 basic Ford cars - IOW not those shown by a different code



And before you ask:
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Correct radio knobs for 1981?

Ford F834
Administrator
In reply to this post by Ford F834
Looks "correct" enough, at least until I find a better one! It fills the hole 😁
SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2
Reply | Threaded
Open this post in threaded view
|

Re: Correct radio knobs for 1981?

Gary Lewis
Administrator
I'd give you Dad's, but it doesn't work.    But I know it is correct for a 1981 Ranger XLT.

Anyway, yours looks great - as does the bezel.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Correct radio knobs for 1981?

Ford F834
Administrator
I don't know (yet) if this one works either... but we'll see... 🤞
SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2
Reply | Threaded
Open this post in threaded view
|

Re: Correct radio knobs for 1981?

Gary Lewis
Administrator
Hope it works.  Gonna be a boring drive w/o a radio.  
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Correct radio knobs for 1981?

1986F150Six
Administrator
In reply to this post by Ford F834
As Jonathan said, the 1985 and 1986 knobs are small and black. I have an old 1985/86 radio if anyone needs the knobs. I do not believe the radio works.