Bullnose Enthusiasts Forum › Marketplace › Want To Buy

9 inch F150 housing

Classic

List

Threaded

12 messages Options

Pete Whitstone

9 inch F150 housing

Hey all, if anyone has an empty 9 inch housing from a F150, I would be interested in buying it. Probably too expensive to ship, so it would have to be somewhere near 75071 (McKinney, TX). Let me know what you have. Thanks!

81 F150 Flareside, Edelbrock Pro Flow4 FI, hydraulic roller 351W, E4OD, 4x4, BW1356
92 F150 RCLB 351W E40D BW1356 mostly stock

Ol' Blue

Re: 9 inch F150 housing

Have you gotten a 9" housing yet? I've got a two of them in Norman, OK, just a couple hours up the road and would make you a very good deal on one.

1982 F150 Flareside 4x4 302 EFI C6 NP208 HP Dana 44 SAS

Gary Lewis

Re: 9 inch F150 housing

Administrator

Don't they check such things at the Red River? Can you smuggle it into Tejas? Don't mess with Texas.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Pete Whitstone

Re: 9 inch F150 housing

In reply to this post by Ol' Blue

I have not. Norman is 3 hours north of me, so I'd have to make that trip on a weekend. Do you have some pictures of what you have? These are from a bullnose truck, correct? Thanks!

81 F150 Flareside, Edelbrock Pro Flow4 FI, hydraulic roller 351W, E4OD, 4x4, BW1356
92 F150 RCLB 351W E40D BW1356 mostly stock

Ol' Blue

Re: 9 inch F150 housing

Good morning, yes both are from bullnose trucks an '81 and an '82. Will see if I can get over there to take some pictures this evening.

Mike

1982 F150 Flareside 4x4 302 EFI C6 NP208 HP Dana 44 SAS

Ol' Blue

Re: 9 inch F150 housing

In reply to this post by Gary Lewis

I exported one of these from Texas so hopefully taking them back isn't a problem

1982 F150 Flareside 4x4 302 EFI C6 NP208 HP Dana 44 SAS

Gary Lewis

Re: 9 inch F150 housing

Administrator

Gary, AKA "Gary fellow": Profile

Pete Whitstone

Re: 9 inch F150 housing

In reply to this post by Ol' Blue

Thanks Mike! If I make the trip to Norman, any parts you are looking for? I can check my stash and see if I have them. I'm open to trades, or cash for the housing.

81 F150 Flareside, Edelbrock Pro Flow4 FI, hydraulic roller 351W, E4OD, 4x4, BW1356
92 F150 RCLB 351W E40D BW1356 mostly stock

Ol' Blue

Re: 9 inch F150 housing

Hi Pete,

Just checking in to make sure you got my DM with the pictures.

Thanks!

Mike

1982 F150 Flareside 4x4 302 EFI C6 NP208 HP Dana 44 SAS

Pete Whitstone

Re: 9 inch F150 housing

Hi Mike, I did not. By DM did you mean a direct message on this forum? I didn't even know that you could do that, and I've looked around a bit to see if I could find it, but I don't see anything.

If you mean you used the function on this site that sends emails, I find that option to only work sporadically. Please just email me directly at my user name with a dot between first and last name, then throw a @att.net on the end.

Thanks!

81 F150 Flareside, Edelbrock Pro Flow4 FI, hydraulic roller 351W, E4OD, 4x4, BW1356
92 F150 RCLB 351W E40D BW1356 mostly stock

Pete Whitstone

Re: 9 inch F150 housing

No longer looking for a housing. Thanks Mike!

81 F150 Flareside, Edelbrock Pro Flow4 FI, hydraulic roller 351W, E4OD, 4x4, BW1356
92 F150 RCLB 351W E40D BW1356 mostly stock

Ol' Blue

Re: 9 inch F150 housing

You are quite welcome Pete! I’m looking forward to seeing how your project for it works out. It was great meeting you guys and seeing your truck!

Mike

1982 F150 Flareside 4x4 302 EFI C6 NP208 HP Dana 44 SAS