Bullnose Enthusiasts Forum

4x4 Spindle stub shaft bolts on the knuckle

Classic

List

Threaded

8 messages Options

Jon M

4x4 Spindle stub shaft bolts on the knuckle

Hi folks,

Still working on Dolly the 1984 F150 4x4. Originally it was a rear wheel drive, and I'm pretty sure the front and rear axles were off an F250, but I don't think that matters here. The 6 bolts on each front knuckle that hold on the spindle stub shaft are serviceable but could be replaced. One of them specifically is slightly stripped but will work. So before I give up and just go with it, are these out there to be purchased? Because I can't find any new ones anywhere.

Jon
1984 Single Cab F150 300/4.9L i6 named 'Dolly'
4X4 - rear 3.55 limited slip, Dana 44
and nothing fancy ... yet.

Gary Lewis

Re: 4x4 Spindle stub shaft bolts on the knuckle

Administrator

Those are basic part number 3C140. But we need to know if you have a Dana 44 or 44HD, as they take an E0TZ 3C140-A, or a Dana 50 or 60, as they take an E0TZ 3C140-B.

Do you have a tag on the front diff?

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Jon M

Re: 4x4 Spindle stub shaft bolts on the knuckle

Gary thanks for the response. Sorry I left out some details. In going through the documentation, it looks like it's a standard Dana44 - the tag says E3TA-UC.

Jon
1984 Single Cab F150 300/4.9L i6 named 'Dolly'
4X4 - rear 3.55 limited slip, Dana 44
and nothing fancy ... yet.

Gary Lewis

Re: 4x4 Spindle stub shaft bolts on the knuckle

Administrator

Yep, that's a D44. So you are looking for PN E0TZ 3C140-A.

Gary, AKA "Gary fellow": Profile

ArdWrknTrk

Re: 4x4 Spindle stub shaft bolts on the knuckle

Administrator

Aka Dana/Spicer 36326-2

https://www.rearcounter.com/E0TZ-3C140-A-parts2218248.html

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Gary Lewis

Re: 4x4 Spindle stub shaft bolts on the knuckle

Administrator

Cool! But where did you find the Dana/Spicer #?

Gary, AKA "Gary fellow": Profile

ArdWrknTrk

Re: 4x4 Spindle stub shaft bolts on the knuckle

Administrator

I crossed the Ford#

When I punch THAT number into Google I find those studs available on Amazon (though NOT sold or delivered by)

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Gary Lewis

Re: 4x4 Spindle stub shaft bolts on the knuckle

Administrator

Cool! Thanks.

Gary, AKA "Gary fellow": Profile