Bullnose Enthusiasts Forum › Marketplace › For Sale, Trade, or Free To A Good Home

351W Serpentine Saginaw

Classic

List

Threaded

4 messages Options

Littlebeefy

351W Serpentine Saginaw

I just left Pull-a-Part Atlanta South. They just put out a 95 E350 351W with the complete belt system including the PS system and bracket. It's white and on aisle 207. I also saw one with an in-line 6 that looked to be removed but complete.

LittleBeefy aka Chad

“Dot Doitall”: 1984 Bronco XLT
460 (C8VE), Edelbrock Pro-Flo 4, ZF5, NP205, D44HP solid axle, 4.56
urban assault vehicle

"Bebe": 2022 Bronco Badlands 2dr
2.7l, Sasquatch, Iconic Silver, Black Marine-grade interior, hard-top

"Celeste": 1979 Porsche 928
4.5l K-jet, 5-sp, S4/GTS brakes, LSD, Pasha interior

Gary Lewis

Re: 351W Serpentine Saginaw

Administrator

Chad - That's good info. I hope someone can grab it, quickly.

But I guess you didn't find your 460 setup?

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

old55pete

Re: 351W Serpentine Saginaw

In reply to this post by Littlebeefy

Chad, Are you looking for a serpentine set up for a 460? will one from a van fit? there are a couple here at U Pick it

Steve
86 Bronco, XLT, 5.0 EFI, EEC IV, AOD, IFS, limited slip front and rear, 3.08 gears, Tilt steering, factory AC

Littlebeefy

Re: 351W Serpentine Saginaw

Hi Steve,
Ya, I'm looking for a P/S bracket from a 460 van with a serpentine. Are you somewhere you can pull it for me and ship it? Are you looking to swap for the 351W v-belt unit I have?