BigBrother-84 Posted November 24, 2022 Share Posted November 24, 2022 Hi Gentlemen! A Bullnose friend made LMC's catalog cover this month. I am wondering about the flexible air tube on the picture, as well as the "single head cover" engine. No ignition coil, distributor? Someone can fix my lack of knowledge? Thanks! Link to comment Share on other sites More sharing options...
85lebaront2 Posted November 24, 2022 Share Posted November 24, 2022 I see a distributor, middle of the driver's side of the engine. Flex covering is over the upper radiator hose to protect it. Coil could be in the cap if he has an HEI, if not the E-core coil is fairly compact. Engine is a 300 (4.9L) in-line 6. Link to comment Share on other sites More sharing options...
BigBrother-84 Posted November 24, 2022 Author Share Posted November 24, 2022 I see a distributor, middle of the driver's side of the engine. Right, I now notice it! I use to see things much more "evidently" under Big Brother's hood. Flex covering is over the upper radiator hose to protect it. I was mystified by this flex hose, which I identified as an "air" one, was completely lost because of it! Engine is a 300 (4.9L) in-line 6. Thanks Bill! I never realized that in line 6 took so much front-back space and comes so close from the radiator. Link to comment Share on other sites More sharing options...
85lebaront2 Posted November 24, 2022 Share Posted November 24, 2022 I see a distributor, middle of the driver's side of the engine. Right, I now notice it! I use to see things much more "evidently" under Big Brother's hood. Flex covering is over the upper radiator hose to protect it. I was mystified by this flex hose, which I identified as an "air" one, was completely lost because of it! Engine is a 300 (4.9L) in-line 6. Thanks Bill! I never realized that in line 6 took so much front-back space and comes so close from the radiator. You think that's tight, how about this? There is about 3" from the fan to the radiator, and yes that is a Bullnose engine compartment, 1986 F350. Link to comment Share on other sites More sharing options...
Rembrant Posted November 24, 2022 Share Posted November 24, 2022 I'm not a 300 inline 6 expert, but I can see in the picture that this engine has the electronic distributor (non-vacuum) with the ignition module mounted on the side of it. It has the "box style" ignition coil mounted on the block just forward of the distributor. You can also see the large wire bundle going through the firewall, so probably a feedback carburetor truck. The fan shroud looks like it's from a small block V8 truck. David may correct me here, but I believe that valve cover only showed up in 1985, or in 1986 as it has the lower center area (maybe 1984?). Link to comment Share on other sites More sharing options...
1986F150Six Posted November 25, 2022 Share Posted November 25, 2022 I'm not a 300 inline 6 expert, but I can see in the picture that this engine has the electronic distributor (non-vacuum) with the ignition module mounted on the side of it. It has the "box style" ignition coil mounted on the block just forward of the distributor. You can also see the large wire bundle going through the firewall, so probably a feedback carburetor truck. The fan shroud looks like it's from a small block V8 truck. David may correct me here, but I believe that valve cover only showed up in 1985, or in 1986 as it has the lower center area (maybe 1984?). Cory, that style is on my son's original 1984. It was in preparation for the F.I. intake plenum which debuted in 1985. Link to comment Share on other sites More sharing options...
FuzzFace2 Posted November 26, 2022 Share Posted November 26, 2022 Cory, that style is on my son's original 1984. It was in preparation for the F.I. intake plenum which debuted in 1985. That looks to be a 300 six feed back system. As Cory pointed out the dist. with box in it and no vacuum line. It also has the square coil bolted to the side of the block just in front of it. The valve cover has a small filter that should have a fitting & hose to the air filter housing for the fresh air for the PCV system. The cover on the upper radiator hose is a add on. I dont see a flex hose on the air filter snorkel to the radiator support to pull in cool fresh air. That is all I seen in the quick look I had. I got to take a better picture of my engine bay as it looks closer to stock other than the AC hose across the air filter. Do I see the truck had AC as I see the bracket for the dryer on the HVAC box Mine before AC was installed Dave ---- ps sorry to pick it apart like I did but I think it should be a full nod motor or closer to factory stock to be on a cover but thats me. Link to comment Share on other sites More sharing options...
FuzzFace2 Posted November 26, 2022 Share Posted November 26, 2022 Here is a picture with AC installed I found on my phone. Dave ---- Link to comment Share on other sites More sharing options...
FuzzFace2 Posted November 26, 2022 Share Posted November 26, 2022 Here is a picture with AC installed I found on my phone. Dave ---- Cory On the fan shroud I dont think you can swap a v8 / 300 six shrouds because of the off set of the motors in the engine bay and how long the 300 is, longer, so shroud would need to be shorter. Now what that might be is a fan guard. On non-AC 300 six trucks they did not come with radiator shrouds just the guard across the top so your hand would not get eaten. The non-AC had smaller radiators and different radiator supports, smaller opening. I wonder if that is a guard for a non-AC truck? I think the upper hose for AC is on backwards and why the cover? Non-AC hose is different. Dave ----- Link to comment Share on other sites More sharing options...
Recommended Posts