muminvater Posted November 16, 2022 Author Share Posted November 16, 2022 Jep, ashes on my head - while uploadling I clicked on "resize" and of course that "funzt nicht" as we like to say. moin moin, so I created a new module plate for the electric parts. At first, there was the construction... And indeed, the real part fits as in CAD. Two screws to be fastened into the chassis frame (arrows). Now I have to short (or length) the cables. :nabble_anim_working:That´s the wednesday, stay well Tobias Link to comment Share on other sites More sharing options...
BigBrother-84 Posted November 16, 2022 Share Posted November 16, 2022 moin moin, so I created a new module plate for the electric parts. At first, there was the construction... And indeed, the real part fits as in CAD. Two screws to be fastened into the chassis frame (arrows). Now I have to short (or length) the cables. :nabble_anim_working:That´s the wednesday, stay well Tobias Hi Tobias! Huge progress! What's the goal of the fan, is there a processor to cool down? Link to comment Share on other sites More sharing options...
muminvater Posted November 16, 2022 Author Share Posted November 16, 2022 ... What's the goal of the fan, is there a processor to cool down? Hi Jeff, take look back to page 2 assy group 18. There you see the ventilation channel for the cabin. The fan is for to ventilate it. You switch it with one of the flip switches on the dashboard. Link to comment Share on other sites More sharing options...
BigBrother-84 Posted November 16, 2022 Share Posted November 16, 2022 ... What's the goal of the fan, is there a processor to cool down? Hi Jeff, take look back to page 2 assy group 18. There you see the ventilation channel for the cabin. The fan is for to ventilate it. You switch it with one of the flip switches on the dashboard. OMG, that's a real cabin fan! Link to comment Share on other sites More sharing options...
muminvater Posted November 16, 2022 Author Share Posted November 16, 2022 OMG, that's a real cabin fan! Yes, it is... first it was just an idea, than: ist is feasable? I had more trouble with the flash light to integrate it into the turn signal lever that was NOT feasable!!! Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 16, 2022 Share Posted November 16, 2022 moin moin, so I created a new module plate for the electric parts. At first, there was the construction... And indeed, the real part fits as in CAD. Two screws to be fastened into the chassis frame (arrows). Now I have to short (or length) the cables. :nabble_anim_working:That´s the wednesday, stay well Tobias That is amazing! So well done! Link to comment Share on other sites More sharing options...
muminvater Posted November 30, 2022 Author Share Posted November 30, 2022 moin moin, so I created a new module plate for the electric parts. At first, there was the construction... And indeed, the real part fits as in CAD. Two screws to be fastened into the chassis frame (arrows). Now I have to short (or length) the cables. :nabble_anim_working:That´s the wednesday, stay well Tobias Hi guys, the electrics would be finished if something hadn't broken again. That means: it wasn´t built in the right way. This time the 2nd disc of the turn signal lever is broken (this project, page 2, assy 19). However, it will be renewed. Either a soldered brass part or a single aluminum part, I´m not sure yet. The fastening of the modul plate swapped from the chassis frame to the body. That makes it easier to assemble it and stick together the cables. Turn signal right Lights switched on, Brakepedal depressed Lights switched on, Brakepedal depressed - and released the cabin light when door opening and at last, the illumination of the speedometer insert and the glove box so that´s the wednesday.... Tobias Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted November 30, 2022 Share Posted November 30, 2022 Hi guys, the electrics would be finished if something hadn't broken again. That means: it wasn´t built in the right way. This time the 2nd disc of the turn signal lever is broken (this project, page 2, assy 19). However, it will be renewed. Either a soldered brass part or a single aluminum part, I´m not sure yet. The fastening of the modul plate swapped from the chassis frame to the body. That makes it easier to assemble it and stick together the cables. Turn signal right Lights switched on, Brakepedal depressed Lights switched on, Brakepedal depressed - and released the cabin light when door opening and at last, the illumination of the speedometer insert and the glove box so that´s the wednesday.... Tobias Outstanding work Tobias! The gifs really showcase how good the lighting is. It looks like your model truck is wearing a Pennsylvania license plate. Link to comment Share on other sites More sharing options...
Gary Lewis Posted December 1, 2022 Share Posted December 1, 2022 Outstanding work Tobias! The gifs really showcase how good the lighting is. It looks like your model truck is wearing a Pennsylvania license plate. Man, that is AWESOME! As I've said before, I built models as a kid, but absolutely nothing compared to this. Link to comment Share on other sites More sharing options...
BigBrother-84 Posted December 1, 2022 Share Posted December 1, 2022 Hi guys, the electrics would be finished if something hadn't broken again. That means: it wasn´t built in the right way. This time the 2nd disc of the turn signal lever is broken (this project, page 2, assy 19). However, it will be renewed. Either a soldered brass part or a single aluminum part, I´m not sure yet. The fastening of the modul plate swapped from the chassis frame to the body. That makes it easier to assemble it and stick together the cables. Turn signal right Lights switched on, Brakepedal depressed Lights switched on, Brakepedal depressed - and released the cabin light when door opening and at last, the illumination of the speedometer insert and the glove box so that´s the wednesday.... Tobias I am... well, speechless is certainly the good word to use, we you find yourselves at a loss for words. Simply amazing Tobias! Link to comment Share on other sites More sharing options...
Recommended Posts