Jump to content
Bullnose Forums

Looking for Lower Dash Assembly


RXRXP1000

Recommended Posts

Welcome! Glad you joined. :nabble_anim_handshake:

But you may have missed the email I sent you asking you to make your first post in the New Member's Start Here folder - after reading the guidelines which are posted there. We do that because we hold everyone to the guidelines and want you to have had a good chance to read them.

So can you confirm that you've read them? If so we are good to go. :nabble_smiley_wink:

Link to comment
Share on other sites

Welcome! Glad you joined. :nabble_anim_handshake:

But you may have missed the email I sent you asking you to make your first post in the New Member's Start Here folder - after reading the guidelines which are posted there. We do that because we hold everyone to the guidelines and want you to have had a good chance to read them.

So can you confirm that you've read them? If so we are good to go. :nabble_smiley_wink:

Hey Gary - sorry about that! I read the guidelines and posted in the new members section. Thanks for an awesome site!

KG.

Link to comment
Share on other sites

Haha, that’s from the previous owner troubleshooting it. Turns out the ECU is fine but the fuel pump not so much…

Yikes!

While talking about fuel systems (I know that's the other thread), the Bullnose sending units have a totally different resistance range and it is backwards from the later sending units. And sending units are keyed to the tank, so you don't want to put a later unit in your tank or vice versa.

Link to comment
Share on other sites

Yikes!

While talking about fuel systems (I know that's the other thread), the Bullnose sending units have a totally different resistance range and it is backwards from the later sending units. And sending units are keyed to the tank, so you don't want to put a later unit in your tank or vice versa.

FYI on the dash it looks like you have factory AC and if so you will need a dash from an AC truck or it will not have the AC vents.

When I made my non-AC truck in to AC truck I had to use the AC dash because of the vents.

And the sad part was the PO broke the dash to remove the radio & HVAC controls so I had to fix that.

So being you are looking for an AC dash trying to find a good one and blue might be a reach?

I say get any color you can and use SEM paint & prep to match the blue.

After the dash repair I used the SEM prep & paint and really happy the way it came out.

Dave ----

Link to comment
Share on other sites

×
×
  • Create New...