Gary Lewis Posted July 13, 2022 Share Posted July 13, 2022 Thanks Gary. Please add me to the map. I looked and it and did not see any other members near me. There were some in the Seattle area. Copy that on the shifting. I was looking at your signature on Dad's truck. Similar to my plans. We are building a stroked 351W roller with the Holley Sniper EFI. Keeping the stock heads for now (but we did polish all the ports when he rebuilt the heads). Looking for cam options. You are now on the map. That sounds like a strong engine, but I don't have a cam recommendation. I've not dealt with spec'ing cams much, and relied on the engine builders to do that. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted July 13, 2022 Share Posted July 13, 2022 You are now on the map. That sounds like a strong engine, but I don't have a cam recommendation. I've not dealt with spec'ing cams much, and relied on the engine builders to do that. Maybe Pete Whitstone, Cory or Angelo would have something to say. Pete just built a roller 351, Cory and Angelo seem to like them too. Link to comment Share on other sites More sharing options...
MattK Posted July 13, 2022 Author Share Posted July 13, 2022 You are now on the map. That sounds like a strong engine, but I don't have a cam recommendation. I've not dealt with spec'ing cams much, and relied on the engine builders to do that. Thanks for updating the map. Link to comment Share on other sites More sharing options...
Machspeed Posted July 21, 2022 Share Posted July 21, 2022 Welcome! Bronco looks like it will be a fun project. Mustang looks nice, did you paint it yourself? Link to comment Share on other sites More sharing options...
Recommended Posts