Flareside Jeff Posted November 4, 2021 Share Posted November 4, 2021 I need some help locating a good straight front crossmember for my F150, as you can see, mine is pretty bent up, I have seen a few like this on other trucks, and I think it's from people trying to jack up their trucks, or trying to tow them from this crossmember. None of the junkyards up here in Ontario keep anything older than about 20 years. If anyone has one that they would like to sell, let me know! Thanks! Link to comment Share on other sites More sharing options...
grumpin Posted November 4, 2021 Share Posted November 4, 2021 I don’t think those are actually cross members, I think they are dork locators! Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 4, 2021 Share Posted November 4, 2021 I don’t think those are actually cross members, I think they are dork locators! As my father would have said, I resemble that comment. Link to comment Share on other sites More sharing options...
Flareside Jeff Posted November 4, 2021 Author Share Posted November 4, 2021 lol, I think this poor truck definitely had found some Dorks in its past! Link to comment Share on other sites More sharing options...
mat in tn Posted November 4, 2021 Share Posted November 4, 2021 lol, I think this poor truck definitely had found some Dorks in its past! very often that is also the front sway bar mount. i just used the last one i had on hand but i could probably source one fairly easily here in tn. but that's no where close to ontario. Link to comment Share on other sites More sharing options...
ratdude747 Posted November 5, 2021 Share Posted November 5, 2021 Mine has the opposite problem... somebody tried to yank on it. Bent it into a nice coolant catcher/drain (I thought that was stock, later found out it isn't! Link to comment Share on other sites More sharing options...
Lima Delta Posted November 5, 2021 Share Posted November 5, 2021 Hi Jeff, Where in Ontario are you? I may have three of those, all of which are still attached to their trucks. Unfortunately I'm not sure I have time to pull any of them before spring but if you're in driving distance of NW ON we may be able to work something out. I know what you mean about the scrapyards... That's why I started buying old hulks I could see in people's yards. But now my wife has something to say about that lol Cheers! Link to comment Share on other sites More sharing options...
HBF84 Posted November 6, 2021 Share Posted November 6, 2021 Jeff, Mine is slightly bent (caused by me many years ago with a chain and trying to get HBF out of the mud…so, yep, I’m that guy!!!) I have been looking for a “front tow hitch” that could replace that cross bar. I suspect one of those universal tow bars that expands width-wise and has multiple mounting holes might be a reasonable replacement/option. I haven’t been able to find anything specific for a Bullnose front hitch in the aftermarket world. And, on this website, it seems that a couple of folks have fabricated their own. Just my two unsolicited cents on your situation! Link to comment Share on other sites More sharing options...
FuzzFace2 Posted November 10, 2021 Share Posted November 10, 2021 Jeff, Mine is slightly bent (caused by me many years ago with a chain and trying to get HBF out of the mud…so, yep, I’m that guy!!!) I have been looking for a “front tow hitch” that could replace that cross bar. I suspect one of those universal tow bars that expands width-wise and has multiple mounting holes might be a reasonable replacement/option. I haven’t been able to find anything specific for a Bullnose front hitch in the aftermarket world. And, on this website, it seems that a couple of folks have fabricated their own. Just my two unsolicited cents on your situation! Mine was also bent but my parts truck was not or not as much so I used it. Dave ---- Link to comment Share on other sites More sharing options...
Flareside Jeff Posted November 12, 2021 Author Share Posted November 12, 2021 Hi Jeff, Where in Ontario are you? I may have three of those, all of which are still attached to their trucks. Unfortunately I'm not sure I have time to pull any of them before spring but if you're in driving distance of NW ON we may be able to work something out. I know what you mean about the scrapyards... That's why I started buying old hulks I could see in people's yards. But now my wife has something to say about that lol Cheers! I am in Bracebridge. Link to comment Share on other sites More sharing options...
Recommended Posts