Earnhardtt3 Posted July 7, 2021 Share Posted July 7, 2021 I am working on my father's 1987 ford e350 7.5l. When he bought this thing it needed some work, it only has 18k on it. So when I was starting this project I noticed that at some point it looked like a nest caught fire and burned some vaccum lines. I got it mostly together but I'm stuck on this part, I have a picture of the part but I'm not sure where to get help from. I really don't do forums. Any help would be greatly appreciated Link to comment Share on other sites More sharing options...
Earnhardtt3 Posted July 7, 2021 Author Share Posted July 7, 2021 Not sure if the picture posted. Link to comment Share on other sites More sharing options...
Gary Lewis Posted July 7, 2021 Share Posted July 7, 2021 Welcome to the Bullnose Forum! Glad you joined. I'll post the pic, below, but you need to go to Bullnose Forum/Forum FAQ's and learn how to post pics. It isn't that hard. But I don't know what that part is. Perhaps others do. But you'll get a whole lot more lookers if you post the question in the main forum rather than here in New Members Start Here. Link to comment Share on other sites More sharing options...
grumpin Posted July 7, 2021 Share Posted July 7, 2021 Welcome! Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted July 7, 2021 Share Posted July 7, 2021 Welcome! I have an '87 7.5l but can't say the engine bay is the same as a van. That looks like a vacuum delay valve. Is your problem that you can't find a new one, or that you need a vacuum hose routing diagram? I see a bit of a number on the unburnt side. What colour was the plastic housing? Link to comment Share on other sites More sharing options...
Earnhardtt3 Posted July 7, 2021 Author Share Posted July 7, 2021 Welcome! I have an '87 7.5l but can't say the engine bay is the same as a van. That looks like a vacuum delay valve. Is your problem that you can't find a new one, or that you need a vacuum hose routing diagram? I see a bit of a number on the unburnt side. What colour was the plastic housing? Black and brown, one side dist other says carb. I can't find a new one. Thank you. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted July 7, 2021 Share Posted July 7, 2021 Black and brown, one side dist other says carb. I can't find a new one. Thank you. Motorcraft DSV8 was number for the black/brown coded delay valve https://www.ebay.com/itm/NEW-OUT-OF-BOX-DSV8-Vacuum-Delay-Valve-D3DE12A091AB-D3DZ12A091B-2B1019-/184563224224?redirect=mobile Link to comment Share on other sites More sharing options...
Earnhardtt3 Posted July 7, 2021 Author Share Posted July 7, 2021 Motorcraft DSV8 was number for the black/brown coded delay valve https://www.ebay.com/itm/NEW-OUT-OF-BOX-DSV8-Vacuum-Delay-Valve-D3DE12A091AB-D3DZ12A091B-2B1019-/184563224224?redirect=mobile I checked it out pyt the vehicle info in and it said it doesn't fit. I took another picture of the un burnt side, it looks like black green brown. And again thank you for your help. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted July 7, 2021 Share Posted July 7, 2021 I checked it out pyt the vehicle info in and it said it doesn't fit. I took another picture of the un burnt side, it looks like black green brown. And again thank you for your help. It's not hard to insert an image. We have instructions in the FAQ. Brown & black is a 20 second forward biased delay valve. I know it works with/for the EGR that used to be on my truck. (no matter what the application chart said) But you don't need an exact match, just one that fits the same parameters. And in that regard, it wouldn't matter if you were using a brown/black valve from a Chevy or Dodge, it would function the same as stock even if it looks different. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted July 7, 2021 Share Posted July 7, 2021 It's not hard to insert an image. We have instructions in the FAQ. Brown & black is a 20 second forward biased delay valve. I know it works with/for the EGR that used to be on my truck. (no matter what the application chart said) But you don't need an exact match, just one that fits the same parameters. And in that regard, it wouldn't matter if you were using a brown/black valve from a Chevy or Dodge, it would function the same as stock even if it looks different. Here... https://www.ebay.com/itm/NOS-Ford-D3DZ-12A091-B-1973-76-Ford-Gran-Torino-Ranchero-Spark-Delay-Valve-/265117113510?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0 Exact physical match for yours, and half the price of the other. As I said, application charts are not gospel. They are not even close sometimes, either..... Link to comment Share on other sites More sharing options...
Recommended Posts