snakebite8 Posted June 17, 2021 Share Posted June 17, 2021 Morning everyone. Seems who ever cut the front springs cut one to much because the truck sits lower on one side. I don’t want to go any lower because the lower side will rub when I turn and hit a bump. I was thinking of getting another spring and cutting it. Any other suggestions? Link to comment Share on other sites More sharing options...
Rembrant Posted June 17, 2021 Share Posted June 17, 2021 Check to make sure the coil spring seats are on the correct sides. The one on the passenger side is a little thicker/taller than the driver's side. If somebody happen to mix them up left to right it would throw the left to right height off by a half an inch or more. Link to comment Share on other sites More sharing options...
FuzzFace2 Posted June 17, 2021 Share Posted June 17, 2021 Why do you want to cut the springs, to lower it? If so that is not the way to do it as it throws off the settings from factory. You need to get factory springs and then go with lowering beams like DJM. They move the spindle up but keeps the factory settings and travel. Dave ---- Link to comment Share on other sites More sharing options...
snakebite8 Posted June 18, 2021 Author Share Posted June 18, 2021 Why do you want to cut the springs, to lower it? If so that is not the way to do it as it throws off the settings from factory. You need to get factory springs and then go with lowering beams like DJM. They move the spindle up but keeps the factory settings and travel. Dave ---- I will have to check that spring! I hope it’s just that. I bought the truck lowered already. So I just thought it was lowered by cutting the spring Link to comment Share on other sites More sharing options...
snakebite8 Posted June 18, 2021 Author Share Posted June 18, 2021 I will have to check that spring! I hope it’s just that. I bought the truck lowered already. So I just thought it was lowered by cutting the spring How can I tell if they did the spindles or if they cut the sponge? Link to comment Share on other sites More sharing options...
Recommended Posts