ArdWrknTrk Posted April 9, 2021 Share Posted April 9, 2021 You bet, Jim......please post. Looking at all options. I think the Van I took it off of was an 83. It also had a 351 Windsor. Thanks! IIRC this hose was $17.95 at CarQuest a decade ago. I used a regular spool type tubing bender to put a quarter turn on the steering box end so it went in square while struggling with a crows foot on a long extension. Definitely get it attached to the steering box first, and then the pump. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted April 9, 2021 Share Posted April 9, 2021 IIRC this hose was $17.95 at CarQuest a decade ago. I used a regular spool type tubing bender to put a quarter turn on the steering box end so it went in square while struggling with a crows foot on a long extension. Definitely get it attached to the steering box first, and then the pump. Service loop is there for good reason. If you decide to have one made, do not have it made tight or straight. It will fail. Link to comment Share on other sites More sharing options...
85lebaront2 Posted April 9, 2021 Share Posted April 9, 2021 Service loop is there for good reason. If you decide to have one made, do not have it made tight or straight. It will fail. Damn that pump and brackets look familiar. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted April 9, 2021 Share Posted April 9, 2021 Damn that pump and brackets look familiar. Thanks Pete! Link to comment Share on other sites More sharing options...
Machspeed Posted April 9, 2021 Author Share Posted April 9, 2021 Service loop is there for good reason. If you decide to have one made, do not have it made tight or straight. It will fail. Jim, can you give me some info on the line that you have? It is different than the one I pulled off the Ford Van. Thanks for the pics and all! Link to comment Share on other sites More sharing options...
Recommended Posts