Rembrant Posted April 4, 2021 Share Posted April 4, 2021 Guys, I’m looking for a pair of left and right vent windows for 1987-1991 doors. If you happen to have a decent set collecting dust let me know. Thanks. Link to comment Share on other sites More sharing options...
Rembrant Posted April 5, 2021 Author Share Posted April 5, 2021 Before I go too far, I should confirm that this truck actually has Bricknose doors/windows in it. I am not near my 1984 at the moment to compare, but the measurements are below: The dividing bar between the vent window and door window is a solid 1 1/4" wide, and I believe the Bullnose one is only an inch or smaller even? And the window itself is just a hair over 21" wide between the seals. I know that they're not 1992-1996 windows, so I am assuming that they are 1987-1991? (Or maybe they are Bullnose, and my eyes are just playing tricks on me?) Anybody? Jim, as the resident Bricknose owner?... Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted April 5, 2021 Share Posted April 5, 2021 Before I go too far, I should confirm that this truck actually has Bricknose doors/windows in it. I am not near my 1984 at the moment to compare, but the measurements are below: The dividing bar between the vent window and door window is a solid 1 1/4" wide, and I believe the Bullnose one is only an inch or smaller even? And the window itself is just a hair over 21" wide between the seals. I know that they're not 1992-1996 windows, so I am assuming that they are 1987-1991? (Or maybe they are Bullnose, and my eyes are just playing tricks on me?) Anybody? Jim, as the resident Bricknose owner?... Give me a little. I'll get to my truck with a tape measure. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted April 5, 2021 Share Posted April 5, 2021 Before I go too far, I should confirm that this truck actually has Bricknose doors/windows in it. I am not near my 1984 at the moment to compare, but the measurements are below: The dividing bar between the vent window and door window is a solid 1 1/4" wide, and I believe the Bullnose one is only an inch or smaller even? And the window itself is just a hair over 21" wide between the seals. I know that they're not 1992-1996 windows, so I am assuming that they are 1987-1991? (Or maybe they are Bullnose, and my eyes are just playing tricks on me?) Anybody? Jim, as the resident Bricknose owner?... Sorry. I got into some epoxy and couldn't stop. Viewable opening Inside the runs. First the front, and then from inside the rear to the front divider. Link to comment Share on other sites More sharing options...
Rembrant Posted April 5, 2021 Author Share Posted April 5, 2021 Sorry. I got into some epoxy and couldn't stop. Viewable opening Inside the runs. First the front, and then from inside the rear to the front divider. Looks the same. Thanks Jim. I'm pretty certain that they are Bricknose doors. I'll confirm against my '84 tonight, but wanted to put up a want ad on a local page today. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted April 5, 2021 Share Posted April 5, 2021 Looks the same. Thanks Jim. I'm pretty certain that they are Bricknose doors. I'll confirm against my '84 tonight, but wanted to put up a want ad on a local page today. Are you wanting the whole #4 (with the front glass run) or just the inverted #7 piece for the vent window, Cory? Link to comment Share on other sites More sharing options...
Rembrant Posted April 5, 2021 Author Share Posted April 5, 2021 Are you wanting the whole #4 (with the front glass run) or just the inverted #7 piece for the vent window, Cory? Technically I think all I need is the metal frame for the triangle window. The existing one is rusted into oblivion...like disintegrated, but I figured it would be easier to locate a complete set of windows. If/when I take the doors apart, I'd like to have all that I need. A local guy says he has a nice set...waiting for pictures this evening when he gets off work. Most 30+ year old parts around here are not very nice...lol. Link to comment Share on other sites More sharing options...
1986F150Six Posted April 7, 2021 Share Posted April 7, 2021 Technically I think all I need is the metal frame for the triangle window. The existing one is rusted into oblivion...like disintegrated, but I figured it would be easier to locate a complete set of windows. If/when I take the doors apart, I'd like to have all that I need. A local guy says he has a nice set...waiting for pictures this evening when he gets off work. Most 30+ year old parts around here are not very nice...lol. Just for comparison to what is offered locally, Cory... https://www.ebay.com/itm/1987-1991-FORD-F150-F250-F350-BRONCO-DRIVER-LEFT-WING-VENT-WINDOW-FRAME-SEAL/112747804195?hash=item1a404af623:g:DC8AAOSwVa5aVsdd https://www.ebay.com/itm/OEM-1980-1991-FORD-F150-F250-F350-BRONCO-DRIVER-LEFT-WING-VENT-WINDOW-FRAME-SEAL/113935732736?hash=item1a87195000:g:UmoAAOSwoSldsgNr https://www.ebay.com/itm/1992-1996-FORD-F150-F250-F350-BRONCO-DRIVER-LEFT-WING-VENT-WINDOW-FRAME-SEAL/184676622752?hash=item2aff95a1a0:g:9RYAAOSwZrJgM-zX https://www.ebay.com/itm/1992-1996-FORD-F150-F250-F350-BRONCO-DRIVER-LEFT-WING-VENT-WINDOW-FRAME-SEAL/122616935525?hash=item1c8c89f465:g:1y4AAOSwqbxaTV0l https://www.ebay.com/itm/1992-1996-FORD-F150-BRONCO-LEFT-DRIVER-SIDE-DOOR-WING-VENT-WINDOW/124657429130?hash=item1d06296a8a:g:vKsAAOSwyNJgYSpN https://www.ebay.com/itm/Front-Vent-Glass-Window-Assembly-1988-FORD-PICKUP-F-150-Driver-Left/184481841216?hash=item2af3f98040:g:kqMAAOSwRylfgKxG Link to comment Share on other sites More sharing options...
Recommended Posts