red1980F150 Posted February 27, 2021 Author Share Posted February 27, 2021 Thanks for that offer, but I think those are out of my league. But it is good to know it can be done. Yeah it's pricey! I might be able to make some of these for you guys here and there. Every once in a while we have to do a test build on a machine for calibration of the machine, or a sensor test, etc. It's entirely possible I could put these on during a test. I didn't mention that the first time because I definitely cannot guarantee it. Today was a big day for the sliders, I finished cleaning them up and installed the passenger side, the driver side will only take another 20 minutes, so I'm essentially done. First thing was cleaning up the parts after removing the columns (support structure for fabrication). Here is one slider cleaned up, and one that is not. And cleaning up the sliding surface on the bezel After cleaning up all 4 parts, and hitting then with a wire wheel, I clear coated them to keep them from dulling over time (hopefully) Tapping the bolt holes on the bezel... Then wobbled out the spring/backplate from the original lock, and bolted it together And here it is installed on Elain I'm really happy with how it looks. My only concern is that it might rattle, but if it does I'll add some plastic between the slider and bezel to fix it up. Link to comment Share on other sites More sharing options...
grumpin Posted February 27, 2021 Share Posted February 27, 2021 Yeah it's pricey! I might be able to make some of these for you guys here and there. Every once in a while we have to do a test build on a machine for calibration of the machine, or a sensor test, etc. It's entirely possible I could put these on during a test. I didn't mention that the first time because I definitely cannot guarantee it. Today was a big day for the sliders, I finished cleaning them up and installed the passenger side, the driver side will only take another 20 minutes, so I'm essentially done. First thing was cleaning up the parts after removing the columns (support structure for fabrication). Here is one slider cleaned up, and one that is not. And cleaning up the sliding surface on the bezel After cleaning up all 4 parts, and hitting then with a wire wheel, I clear coated them to keep them from dulling over time (hopefully) Tapping the bolt holes on the bezel... Then wobbled out the spring/backplate from the original lock, and bolted it together And here it is installed on Elain I'm really happy with how it looks. My only concern is that it might rattle, but if it does I'll add some plastic between the slider and bezel to fix it up. Great job! Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 28, 2021 Share Posted February 28, 2021 Yeah it's pricey! I might be able to make some of these for you guys here and there. Every once in a while we have to do a test build on a machine for calibration of the machine, or a sensor test, etc. It's entirely possible I could put these on during a test. I didn't mention that the first time because I definitely cannot guarantee it. Today was a big day for the sliders, I finished cleaning them up and installed the passenger side, the driver side will only take another 20 minutes, so I'm essentially done. First thing was cleaning up the parts after removing the columns (support structure for fabrication). Here is one slider cleaned up, and one that is not. And cleaning up the sliding surface on the bezel After cleaning up all 4 parts, and hitting then with a wire wheel, I clear coated them to keep them from dulling over time (hopefully) Tapping the bolt holes on the bezel... Then wobbled out the spring/backplate from the original lock, and bolted it together And here it is installed on Elain I'm really happy with how it looks. My only concern is that it might rattle, but if it does I'll add some plastic between the slider and bezel to fix it up. That is really cool! But, being metal it should be able to withstand 400F, right? That being the case the parts could be powder coated. And certainly we could hit them with SEM Color Coat to make them match the interior. Link to comment Share on other sites More sharing options...
red1980F150 Posted February 28, 2021 Author Share Posted February 28, 2021 That is really cool! But, being metal it should be able to withstand 400F, right? That being the case the parts could be powder coated. And certainly we could hit them with SEM Color Coat to make them match the interior. You know, I hadn't even thought of that. I've never powder coating anything, that could be interesting. I'll have to think on it, I think on one hand it's cool to have it stand out since it's obviously unique, but on the other hand it shouldn't stand out in a bad way. Â Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 28, 2021 Share Posted February 28, 2021 You know, I hadn't even thought of that. I've never powder coating anything, that could be interesting. I'll have to think on it, I think on one hand it's cool to have it stand out since it's obviously unique, but on the other hand it shouldn't stand out in a bad way. I've powder coated thousands of things, but there's no way I know of to have a powder that matches the colors Ford used on the interiors, unless it is black. And even then there are lots of "blacks". But SEM Color Coat is said to work on metal. So you could match it that way. Link to comment Share on other sites More sharing options...
Frank Wyatt Posted February 28, 2021 Share Posted February 28, 2021 I've powder coated thousands of things, but there's no way I know of to have a powder that matches the colors Ford used on the interiors, unless it is black. And even then there are lots of "blacks". But SEM Color Coat is said to work on metal. So you could match it that way. Very nice. Price wise they would be too much for me but they would look great in my truck. Congrats. Link to comment Share on other sites More sharing options...
FuzzFace2 Posted February 28, 2021 Share Posted February 28, 2021 Very nice. Price wise they would be too much for me but they would look great in my truck. Congrats. Nice job and look great installed in your truck. My truck had nothing for either door so don't even know what they look like other than on the web. They are also out of my price range and being LMC no longer has them and if they did they may have the same issues as the factory ones. I think I am going with the door top push / pull but keep my latch so they work backwards. Oh I also need to replace the door panels and why the door lock change. Dave ---- ps they would look great left alum on red door panels Link to comment Share on other sites More sharing options...
red1980F150 Posted March 1, 2021 Author Share Posted March 1, 2021 Nice job and look great installed in your truck. My truck had nothing for either door so don't even know what they look like other than on the web. They are also out of my price range and being LMC no longer has them and if they did they may have the same issues as the factory ones. I think I am going with the door top push / pull but keep my latch so they work backwards. Oh I also need to replace the door panels and why the door lock change. Dave ---- ps they would look great left alum on red door panels In your case we would have to figure out a solution to hold it in the door panel since I reused the backing plate from the original. I realized as I reviewed the thread that I didn't post a good closeup of the assembled part, so here is one. Link to comment Share on other sites More sharing options...
Gary Lewis Posted March 1, 2021 Share Posted March 1, 2021 In your case we would have to figure out a solution to hold it in the door panel since I reused the backing plate from the original. I realized as I reviewed the thread that I didn't post a good closeup of the assembled part, so here is one. We can probably come up with backing plates. But the rest of it is usually broken, if not missing. Can you do it in plastic for less cost? Link to comment Share on other sites More sharing options...
red1980F150 Posted March 1, 2021 Author Share Posted March 1, 2021 We can probably come up with backing plates. But the rest of it is usually broken, if not missing. Can you do it in plastic for less cost? Oh yeah, plastic is easy. It would cost about $1 in material and then whatever one wants to charge in machine time. Since it isn't really a business for me I wouldn't need much, if anything. I have a 3D printer for plastic sitting on the desk here near the computer. I'll print one sometime this week and post pictures. The inexpensive plastic machines don't have the same resolution as the laser machines (metal or plastic), but I bet it's still better than a broken lock :) Link to comment Share on other sites More sharing options...
Recommended Posts