CRittaler Posted January 1, 2021 Share Posted January 1, 2021 Hi all, I've been working on my newly acquired truck and am busy undoing all the wrong the previous owners have done to it. I have the hot fuel option 460 and just finished bending and flaring some new lines for the fuel separator that head down the block. I'm improvising my own mounting since all the factory mounting hardware is missing. What I would like to know is where the soft lines route between the hard lines on the engine and the hard lines on the frame. I would also like to know where the hard lines on the frame are secured. My frame hard lines are just loose and flopping around. If someone has pictures of the area it would be great. Currently I have sliced some rubber fuel line lengthwise and put it around each hard line and synched them together with a metal zip tie since it's so close to the manifold. Thanks! Link to comment Share on other sites More sharing options...
kramttocs Posted January 1, 2021 Share Posted January 1, 2021 I'll grab a photo tomorrow unless someone beats me to it. There is a plastic clip on top of the frame to hold them although most I've seen aren't held well by them any longer. They remain in place held by the rubber lines and the clips on the inside of the frame further back. If you're improvising, then one thing that comes to mind to replace the plastic clip would be those metal clamps on the older style metal electrical boxes. Protect it with some hose like you are doing already. If you need the clamp that goes on the fuel pump block off plate, let me know. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted January 1, 2021 Share Posted January 1, 2021 Scott has a good idea. I usually end up using rubber lined stainless P-clamps for stuff like that, but they can be frustrating when you're trying to get a bolt through them back to back. Having a stud makes it a lot easier. Are you having trouble inserting images? We have an FAQ for that. Link to comment Share on other sites More sharing options...
CRittaler Posted January 1, 2021 Author Share Posted January 1, 2021 Scott has a good idea. I usually end up using rubber lined stainless P-clamps for stuff like that, but they can be frustrating when you're trying to get a bolt through them back to back. Having a stud makes it a lot easier. Are you having trouble inserting images? We have an FAQ for that. I've used one rubber P clamp so far, but haven't found a lot of places to put them on the side of the block. I posted from my phone, not sure why the photos messed up, I used the attach feature (paperclip) and chose them off my phone. Link to comment Share on other sites More sharing options...
CRittaler Posted January 1, 2021 Author Share Posted January 1, 2021 I'll grab a photo tomorrow unless someone beats me to it. There is a plastic clip on top of the frame to hold them although most I've seen aren't held well by them any longer. They remain in place held by the rubber lines and the clips on the inside of the frame further back. If you're improvising, then one thing that comes to mind to replace the plastic clip would be those metal clamps on the older style metal electrical boxes. Protect it with some hose like you are doing already. If you need the clamp that goes on the fuel pump block off plate, let me know. Thanks! I'll check that out! Want to get these lines squared away before I put the new power steering pump in. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted January 1, 2021 Share Posted January 1, 2021 I've used one rubber P clamp so far, but haven't found a lot of places to put them on the side of the block. I posted from my phone, not sure why the photos messed up, I used the attach feature (paperclip) and chose them off my phone. Scott* suggested the mechanical fuel pump block off plate on the side of the timing case. I guess he has a clamp to offer? I suggested putting a stud into the plate, to make it easier to get everything into place. Yeah, you're attaching the photo files but not wrapping them in the tags that get that image to display. That's why you use the 'insert image' tab above the reply window. (Or keyboard in the tags, if you're using a computer and have them branded into muscle memory) Anyway, it's in the FAQ's under 'Bullnose Forum' at the top of every page. Link to comment Share on other sites More sharing options...
CRittaler Posted January 1, 2021 Author Share Posted January 1, 2021 Scott* suggested the mechanical fuel pump block off plate on the side of the timing case.I guess he has a clamp to offer?I suggested putting a stud into the plate, to make it easier to get everything into place.Yeah, you're attaching the photo files but not wrapping them in the tags that get that image to display.That's why you use the 'insert image' tab above the reply window. (Or keyboard in the tags, if you're using a computer and have them branded into muscle memory)Anyway, it's in the FAQ's under 'Bullnose Forum' at the top of every page.Yeah, not sure what happened. I had the forum open in the browser on my phone and used the attach function same as I would have on a PC. I know the factory spot is off the fuel plate block off, I have to find a P clamp that will fit the fuel lines and the bolt for the block off. Thanks! Sent via the physical keyboard on my Unhertz Titan Link to comment Share on other sites More sharing options...
kramttocs Posted January 1, 2021 Share Posted January 1, 2021 Here you can see the clip. It's a single line clip that is the same used on my mechanical pump 460 and 400. Here is the routing. Once you get the two hardlines in place, the routing presents itself really. You can see I ziptied mine also. I have a few items on my jy list so can look for a block off plate/bracket if you want. Link to comment Share on other sites More sharing options...
CRittaler Posted January 1, 2021 Author Share Posted January 1, 2021 Here you can see the clip. It's a single line clip that is the same used on my mechanical pump 460 and 400. Here is the routing. Once you get the two hardlines in place, the routing presents itself really. You can see I ziptied mine also. I have a few items on my jy list so can look for a block off plate/bracket if you want. Thanks! Those are exactly what I was looking for. A P clamp will work nicely at that spot. I wouldn't worry about looking for a bracket, a picture would be nice so I can try and make something. Thanks! Link to comment Share on other sites More sharing options...
kramttocs Posted January 1, 2021 Share Posted January 1, 2021 Thanks! Those are exactly what I was looking for. A P clamp will work nicely at that spot. I wouldn't worry about looking for a bracket, a picture would be nice so I can try and make something. Thanks! Let me know if you need more. The block off plate has an aligning pin on it (why there is a small hole). Link to comment Share on other sites More sharing options...
Recommended Posts