Rembrant Posted December 29, 2020 Share Posted December 29, 2020 Gents, I'm just wiring up some loose ends on my 1980 F150 project, and that includes the PMGR starter that I scavenged from a 1996 F150 at the junkyard a couple years ago. I noticed in the instructions here on the forum that a #10 wire was used for this. Is this size wire required? I will buy some if I need it, but the reason I ask is that I have a roll on hand of 14awg 600v TEW wire, and was wondering if that would be sufficient for the trigger wire? Link to comment Share on other sites More sharing options...
kramttocs Posted December 29, 2020 Share Posted December 29, 2020 12awg is the smallest I've seen in any official doc (including the Powermaster paper mine came with). I know, doesn't help with the 14awg question My vote would be with the 10. I went with 8 since, similar to your 14, I had it on hand. Update: Just did some more browsing to see if I could find anything other than 12 or 10 and did come across 18awg in a diagram. Was for a fox body. I'd still do the 10 Link to comment Share on other sites More sharing options...
Rembrant Posted December 29, 2020 Author Share Posted December 29, 2020 12awg is the smallest I've seen in any official doc (including the Powermaster paper mine came with). I know, doesn't help with the 14awg question My vote would be with the 10. I went with 8 since, similar to your 14, I had it on hand. Update: Just did some more browsing to see if I could find anything other than 12 or 10 and did come across 18awg in a diagram. Was for a fox body. I'd still do the 10 Thanks for the reply Scott. My brother in-law just happened to call right after I posted this, and he is a technical guy (at work, and at home) and he said that he ran 14ga wire...like the rest of us, lol, because he had it on hand, but he said he also tested it at the same time. He said that the relay only drew about 2.5amps (in rush) and once closed was even less.(That was not on a Ford starter, but a similar GM starter...could be completely different for all I know). The reason I was curious is that the factory trigger wire on my '84, and this '80, is really small...maybe 18ga? Anyway, I understand that bigger is certainly better. Maybe I'll run the 14ga that I have and test it myself and see what the meter says. If 14ga is not enough, it's no problem to change it out. Heck, I don't even know if the engine will run, but I'll probably give the starter a good workout trying. Link to comment Share on other sites More sharing options...
kramttocs Posted December 29, 2020 Share Posted December 29, 2020 12awg is the smallest I've seen in any official doc (including the Powermaster paper mine came with). I know, doesn't help with the 14awg question My vote would be with the 10. I went with 8 since, similar to your 14, I had it on hand. Update: Just did some more browsing to see if I could find anything other than 12 or 10 and did come across 18awg in a diagram. Was for a fox body. I'd still do the 10 Thanks for the reply Scott. My brother in-law just happened to call right after I posted this, and he is a technical guy (at work, and at home) and he said that he ran 14ga wire...like the rest of us, lol, because he had it on hand, but he said he also tested it at the same time. He said that the relay only drew about 2.5amps (in rush) and once closed was even less.(That was not on a Ford starter, but a similar GM starter...could be completely different for all I know). The reason I was curious is that the factory trigger wire on my '84, and this '80, is really small...maybe 18ga? Anyway, I understand that bigger is certainly better. Maybe I'll run the 14ga that I have and test it myself and see what the meter says. If 14ga is not enough, it's no problem to change it out. Heck, I don't even know if the engine will run, but I'll probably give the starter a good workout trying. 2.5amps. Good to have a number for it, even if from a GM starter. I was hoping to find something like that when searching but never saw any reference to what the solenoid pulled. With that number, hard to find a reason to not use the on hand 14. Often hear the 'grind it til you find it' phrase but not many about starting... how about 'turn it til you burn it'? Link to comment Share on other sites More sharing options...
swampedout Posted December 31, 2020 Share Posted December 31, 2020 2.5amps. Good to have a number for it, even if from a GM starter. I was hoping to find something like that when searching but never saw any reference to what the solenoid pulled. With that number, hard to find a reason to not use the on hand 14. Often hear the 'grind it til you find it' phrase but not many about starting... how about 'turn it til you burn it'? Throw parts til it starts! Link to comment Share on other sites More sharing options...
kramttocs Posted December 31, 2020 Share Posted December 31, 2020 Throw parts til it starts! Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted December 31, 2020 Share Posted December 31, 2020 2.5amps. Good to have a number for it, even if from a GM starter. I was hoping to find something like that when searching but never saw any reference to what the solenoid pulled. With that number, hard to find a reason to not use the on hand 14. Often hear the 'grind it til you find it' phrase but not many about starting... how about 'turn it til you burn it'? Reference is right here on the forum. Gary has the test sheet from one of my (now) 5 PMGR starters. 40A to pull, 13A to hold.... I used #12, but what's the worst that can happen? Link to comment Share on other sites More sharing options...
kramttocs Posted December 31, 2020 Share Posted December 31, 2020 Reference is right here on the forum. Gary has the test sheet from one of my (now) 5 PMGR starters. 40A to pull, 13A to hold.... I used #12, but what's the worst that can happen? Thanks Jim! Forgot that you tested this but now that you mention it I recall a discussion how one needed to be careful if replacing the fender mounted relay with another offering. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted December 31, 2020 Share Posted December 31, 2020 Thanks Jim! Forgot that you tested this but now that you mention it I recall a discussion how one needed to be careful if replacing the fender mounted relay with another offering. I went to the 'upgrades' page, to post the Datasheet but Gary must have it somewhere else.... I've now got my starter solenoid wired through a 40A cube relay in my new 6 position power distribution box. Link to comment Share on other sites More sharing options...
Gary Lewis Posted December 31, 2020 Share Posted December 31, 2020 I went to the 'upgrades' page, to post the Datasheet but Gary must have it somewhere else.... I've now got my starter solenoid wired through a 40A cube relay in my new 6 position power distribution box. Try Documentation/Engines/Starters for the info on your DB starter. But there's also the page at Documentation/Electrical/PMGR Starter Wiring. And that's the page where it says to use #10 wiring as the starter trigger wire. Looks like we need some re-organization, revisions, etc. Link to comment Share on other sites More sharing options...
Recommended Posts