Rembrant Posted September 14, 2020 Share Posted September 14, 2020 Came across these while looking for other stuff...they appear to be in like-new condition, and are very cheap. Not sure if the guy would even ship them, but if somebody was seeking a set for a restoration it would be worth the ask. https://www.kijiji.ca/v-other-auto-parts-and-accessories/leamington/set-of-1980-ford-4x4-original-hub-caps/1523945625 Link to comment Share on other sites More sharing options...
1986F150Six Posted September 14, 2020 Share Posted September 14, 2020 Great find, Cory! Link to comment Share on other sites More sharing options...
delco1946 Posted September 14, 2020 Share Posted September 14, 2020 Great find, Cory! Just checking as to not miss something, but these would fit all wheels right, regardless of diameter? I have an 1981 4x4 that these would look great on! Link to comment Share on other sites More sharing options...
1986F150Six Posted September 14, 2020 Share Posted September 14, 2020 Just checking as to not miss something, but these would fit all wheels right, regardless of diameter? I have an 1981 4x4 that these would look great on! Stock 15" steel rims. These are for 4 wheel drive. Link to comment Share on other sites More sharing options...
delco1946 Posted September 14, 2020 Share Posted September 14, 2020 Stock 15" steel rims. These are for 4 wheel drive. Not 16 inch? Wouldn’t the inner ring they snap on to, be the same regardless of outer diameter (I hope)? I guess I thought that would be a standard size. Link to comment Share on other sites More sharing options...
1986F150Six Posted September 14, 2020 Share Posted September 14, 2020 Not 16 inch? Wouldn’t the inner ring they snap on to, be the same regardless of outer diameter (I hope)? I guess I thought that would be a standard size. Ask the seller to measure the from one side to the opposite side [diameter]. The 15" are smaller 10 1/2" whereas the F250 and 350 are 12", I believe. F150 2 wheel drive example: https://www.ebay.com/itm/78-94-Ford-Truck-Dog-Dish-HUB-CAPS-10-1-2-Set-4-Hubcaps-F100-F150-1-2-ton-15/293687693027?hash=item4461268ee3:g:irsAAOSw1vFfNBmg F250/350 example: https://www.ebay.com/itm/M-1-1978-1991-Ford-F250-Truck-12-inch-Center-Cap-Hub-Dog-Dish-4WD-Pickup-FRONT/224066390178?fits=Year%3A1986%7CModel%3AF-250%7CMake%3AFord&hash=item342b65c8a2:g:WpMAAOSw29Ne~oHU Link to comment Share on other sites More sharing options...
Rembrant Posted September 14, 2020 Author Share Posted September 14, 2020 Ask the seller to measure the from one side to the opposite side [diameter]. The 15" are smaller 10 1/2" whereas the F250 and 350 are 12", I believe. F150 2 wheel drive example: https://www.ebay.com/itm/78-94-Ford-Truck-Dog-Dish-HUB-CAPS-10-1-2-Set-4-Hubcaps-F100-F150-1-2-ton-15/293687693027?hash=item4461268ee3:g:irsAAOSw1vFfNBmg F250/350 example: https://www.ebay.com/itm/M-1-1978-1991-Ford-F250-Truck-12-inch-Center-Cap-Hub-Dog-Dish-4WD-Pickup-FRONT/224066390178?fits=Year%3A1986%7CModel%3AF-250%7CMake%3AFord&hash=item342b65c8a2:g:WpMAAOSw29Ne~oHU Look on Gary's wheel covers page here: http://www.garysgaragemahal.com/wheel-covers.html They are the Type-3's, I believe. You can scroll to the 1980 part number section and then check the wheel types in the columns. Link to comment Share on other sites More sharing options...
delco1946 Posted September 14, 2020 Share Posted September 14, 2020 Look on Gary's wheel covers page here: http://www.garysgaragemahal.com/wheel-covers.html They are the Type-3's, I believe. You can scroll to the 1980 part number section and then check the wheel types in the columns. I asked him to, and measured mine which are 12 1/4" inches OD. But....they already sold while talking to him :( Link to comment Share on other sites More sharing options...
Rembrant Posted September 14, 2020 Author Share Posted September 14, 2020 I asked him to, and measured mine which are 12 1/4" inches OD. But....they already sold while talking to him :( Ya I figured they’d sell pretty quickly at that price. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted September 15, 2020 Share Posted September 15, 2020 Just checking as to not miss something, but these would fit all wheels right, regardless of diameter? I have an 1981 4x4 that these would look great on! These hubcaps are for non-floating rear axles. You need the really deep rears to fit Dana 60 and Sterling full floaters. Link to comment Share on other sites More sharing options...
Recommended Posts