FuzzFace2 Posted August 5, 2020 Share Posted August 5, 2020 I don't remember who it was or the thread it was in but someone asked where does the add on AC wiring harness plug in to the main harness? It is that gray plug in the center. you unplug it and 1 side of that plug goes into 1 side of the AC harness, the other side of both do the same. Sorry it took so long to post this up should have posted or sent a PM as a reminder. Dave ---- Link to comment Share on other sites More sharing options...
85lebaront2 Posted August 5, 2020 Share Posted August 5, 2020 If I remember correctly, with the heater control panel pulled out there is a plug that goes to the blower motor and the AC harness plugs there in place of the heater only harness. The harness exits the cab on the right side under the AC evaporator casing. This the original evaporator casing on Darth, heat shield faces the exhaust manifold area to protect the harness visible in the foreground. Link to comment Share on other sites More sharing options...
FuzzFace2 Posted August 5, 2020 Author Share Posted August 5, 2020 If I remember correctly, with the heater control panel pulled out there is a plug that goes to the blower motor and the AC harness plugs there in place of the heater only harness. The harness exits the cab on the right side under the AC evaporator casing. This the original evaporator casing on Darth, heat shield faces the exhaust manifold area to protect the harness visible in the foreground. Thanks Bill I should have said that Dave ---- Link to comment Share on other sites More sharing options...
Recommended Posts