reamer Posted July 21, 2020 Share Posted July 21, 2020 Just a stock cover and fuel pump eccentric. Thanks reamer Link to comment Share on other sites More sharing options...
Rembrant Posted July 21, 2020 Share Posted July 21, 2020 Just a stock cover and fuel pump eccentric. Thanks reamer Ron, You probably found these, but in case you didn't, the aftermarket kits are cheap: https://www.summitracing.com/parts/cca-235/make/ford A minor FYI...if you happen to locate a timing cover for an EFI 302, then it will work. I took apart an '85, and the covers are the same casting, without the actual hole for the fuel pump arm. I drilled that one out, and then cleaned the hole up with the Dremel. The threaded holes are there regardless. Edit...I'm only referring to the 1985-1986 302 EFI...I assume the covers changed in 1987 when they went to the serpentine system. Link to comment Share on other sites More sharing options...
FuzzFace2 Posted July 22, 2020 Share Posted July 22, 2020 Just a stock cover and fuel pump eccentric. Thanks reamer Edit...I'm only referring to the 1985-1986 302 EFI...I assume the covers changed in 1987 when they went to the serpentine system. I am pretty sure you are right as the water pumps turn backwards so the covers are made for that. Dave ---- Link to comment Share on other sites More sharing options...
Recommended Posts