FuzzFace2 Posted July 31, 2020 Share Posted July 31, 2020 Also, there’s a black plastic hose that when from the tank to the filler - I assume it’s an air release for easier pumping? Either way, I accidentally removed it and have no idea how to put it back. Don't know if you got it back in or not but that black plastic hose fits into a fitting both at the tank & filler neck. Its kind of a opening that it pushes into to hold it in place. Here is a picture of the neck side, tank is the same. Dave ---- Link to comment Share on other sites More sharing options...
FrazerJames Posted July 31, 2020 Author Share Posted July 31, 2020 Also, there’s a black plastic hose that when from the tank to the filler - I assume it’s an air release for easier pumping? Either way, I accidentally removed it and have no idea how to put it back. Don't know if you got it back in or not but that black plastic hose fits into a fitting both at the tank & filler neck. Its kind of a opening that it pushes into to hold it in place. Here is a picture of the neck side, tank is the same. Dave ---- Thanks! Yeah, I just opened it up and figured it out. Appreciate that! Link to comment Share on other sites More sharing options...
FuzzFace2 Posted August 1, 2020 Share Posted August 1, 2020 Thanks! Yeah, I just opened it up and figured it out. Appreciate that! NP I should point out that picture is of the rear tank install on my flare side, the factory never had a rear tank in 80 - 86 flare side trucks. I used some parts from a style side dual tank truck and front flare side truck to make it work. As you can see I used the copper to join the plastic parts together and some exh. pipe for the outer hose. It filled great a few times but had to drop the tank because the new float went bad. I did not want to mess with the filler hoses or the door, fresh paint and all. So I only dropped 1 side to get to the sender and think the plastic hose moved or came loose as it is a PITA to fill now. If I lift up and point the nozzle to the lower part of the neck it seams to fill ok. Front tank is no problem to fill. Dave ---- Link to comment Share on other sites More sharing options...
Recommended Posts