86 12 Brutus Posted July 19, 2020 Author Share Posted July 19, 2020 Dave, i have your pics, the pulley the inside 2 grooves are the same, the outside one for the ac belt is wider. Also is a pic of he compressor, is the same compressor that was in lincolns and crown vics i believe its an FS6. You are right, the evap has had some stop leak put into it. Pretty much everything in the ac system deteriorated over the years so we just decided to go all new Link to comment Share on other sites More sharing options...
FuzzFace2 Posted July 20, 2020 Share Posted July 20, 2020 Dave, i have your pics, the pulley the inside 2 grooves are the same, the outside one for the ac belt is wider. Also is a pic of he compressor, is the same compressor that was in lincolns and crown vics i believe its an FS6. You are right, the evap has had some stop leak put into it. Pretty much everything in the ac system deteriorated over the years so we just decided to go all new I think you are doing the right thing on replacing everything if the system is that bad. This way when you charge it and start using it you will be frosty LOL Thanks for the pictures it helps, if not me someone else down the road. Till I knew there was a 3 groove large dia. pulley I was just guessing. A member found a water pump pulley with the 3 grooves and should be on its way in a day or two. I was told mine, from the parts truck, held psi till they hit the condenser when pulling the motor and crushed the tubes. When I pulled the orifice valve it was nice and clean so I feel the evap on mine is in good shape. Only the compressor is used from junk yard but the oil that spilled out looks good. A few more parts to replace the wrong ones I got and I should be good to go. Dave ---- Link to comment Share on other sites More sharing options...
Recommended Posts