Chris Guthro Posted May 17, 2020 Author Share Posted May 17, 2020 That's a serious piece! You must have a LOT of pressure on that. And no bracket on the firewall????? Think it was bottoming out before completely being maxed out. So I die grind a bit off the fork, and a bit around radius of bell opening. So I’ll get it on tomorrow and see how it is Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted May 17, 2020 Share Posted May 17, 2020 Think it was bottoming out before completely being maxed out. So I die grind a bit off the fork, and a bit around radius of bell opening. So I’ll get it on tomorrow and see how it is You're going to want the firewall reinforcement. If it's not bad yet you might get away with the small one. When Cory comes up have him work the clutch while you look at the master and see how much the nose rises and falls. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted May 17, 2020 Share Posted May 17, 2020 I really like that hood! What are you going to use to fuel this beast? Link to comment Share on other sites More sharing options...
Chris Guthro Posted May 17, 2020 Author Share Posted May 17, 2020 I really like that hood! What are you going to use to fuel this beast? Where do you get the enforcements? I’m interested in the small one! It’s got a 750 edelbrock on it to break it in. But it’s gonna get a 800 quick fuel I think when it comes time to put it on the road Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 17, 2020 Share Posted May 17, 2020 Where do you get the enforcements? I’m interested in the small one! It’s got a 750 edelbrock on it to break it in. But it’s gonna get a 800 quick fuel I think when it comes time to put it on the road I think I have the small one I took out of Big Blue. You can have it for the shipping cost. But, I know shipping costs to Canada are high. Link to comment Share on other sites More sharing options...
Chris Guthro Posted May 17, 2020 Author Share Posted May 17, 2020 I think I have the small one I took out of Big Blue. You can have it for the shipping cost. But, I know shipping costs to Canada are high. Sent ya a message Gary!! Interested to see what they look like Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted May 17, 2020 Share Posted May 17, 2020 Sent ya a message Gary!! Interested to see what they look like It's a little triangle that bolts through the pinch weld above and through the tranny tunnel on the right side. If this lockdown ever ends maybe Cory can pick it up for you in Maine? Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 17, 2020 Share Posted May 17, 2020 Sent ya a message Gary!! Interested to see what they look like Got the message. I'll have to find it, but it is in the shop so I should be able to find it tomorrow. (Maybe I'll find the lower steering shaft at the same time? Maybe they are hiding together?) Anyway, it is yours if you want it. The little ones were used if the firewall isn't cracked. The bigger one is for when the firewall is already broken. But as I was going with a heavier duty clutch and had the big one I installed it. Here's a pic of the little guy installed, although not correctly as it should have been bolted on the right side as that is a big part of how if gets its strength. And here's a pic of it and the larger one I put in. Link to comment Share on other sites More sharing options...
Chris Guthro Posted May 17, 2020 Author Share Posted May 17, 2020 Got the message. I'll have to find it, but it is in the shop so I should be able to find it tomorrow. (Maybe I'll find the lower steering shaft at the same time? Maybe they are hiding together?) Anyway, it is yours if you want it.The little ones were used if the firewall isn't cracked. The bigger one is for when the firewall is already broken. But as I was going with a heavier duty clutch and had the big one I installed it.Here's a pic of the little guy installed, although not correctly as it should have been bolted on the right side as that is a big part of how if gets its strength.And here's a pic of it and the larger one I put in.That’s exactly what I’d need!!! Not ugly and gawdy!! My firewall is mint. So the small one would be good. I’d like to find one for the pull truck now haha Sent from my iPhone Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted May 17, 2020 Share Posted May 17, 2020 e3tz7k509a is the Ford p/n Link to comment Share on other sites More sharing options...
Recommended Posts