ArdWrknTrk Posted June 5, 2020 Share Posted June 5, 2020 You are not to far from my folks I was born and raised in Orange County. I used to love Sunday rides up there, until it got popular and idiots ticked the police off. Orange county is still getting built up as NYC's urban sprawl increases. I hope your parents are ok with it. Link to comment Share on other sites More sharing options...
Danny G Posted June 5, 2020 Share Posted June 5, 2020 I'm sure if it's NIB and you have the receipt you could sell it for what you bought it for. I know the managers at my two local stores. (White Plains & Orange) If the box wasn't beat up they would let me trade up. I also go to the Bridgeport and Bronx stores, but not enough to know the staff. Ill put it up on CL and also stop by HF tomorrow and see if they will let me trade up. I definitely don't have the reciept. Link to comment Share on other sites More sharing options...
Danny G Posted June 23, 2020 Share Posted June 23, 2020 Ill put it up on CL and also stop by HF tomorrow and see if they will let me trade up. I definitely don't have the reciept. Got the new welder in, lots of interest in the old one but I've been too busy/sick to connect with someone to part with it. I cannot believe how small and light this thing is. Absolutely amazing. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted June 23, 2020 Share Posted June 23, 2020 Got the new welder in, lots of interest in the old one but I've been too busy/sick to connect with someone to part with it. I cannot believe how small and light this thing is. Absolutely amazing. Looking forward to an honest review. I'm willing to weigh in with opinion, and what little advice I can offer... Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted July 13, 2020 Share Posted July 13, 2020 Looking forward to an honest review. I'm willing to weigh in with opinion, and what little advice I can offer... I went over to Ossining yesterday to give my buddy Theo a hand. Welded some feet on his big Generac, braced his favorite Jackson wheelbarrow and welded a new hitch on his rusty trailer. The little Titanium 125 did fine on 100' of 10Ga. Yellowjacket extension cord. Definitely had no problem burning the edge off the new hitch. Penetration is good even on 'D' when working overhead. Definitely not my finest work, but seems very solid. Link to comment Share on other sites More sharing options...
Gary Lewis Posted July 13, 2020 Share Posted July 13, 2020 I went over to Ossining yesterday to give my buddy Theo a hand. Welded some feet on his big Generac, braced his favorite Jackson wheelbarrow and welded a new hitch on his rusty trailer. The little Titanium 125 did fine on 100' of 10Ga. Yellowjacket extension cord. Definitely had no problem burning the edge off the new hitch. Penetration is good even on 'D' when working overhead. Definitely not my finest work, but seems very solid. It does look very solid. Seems the machine is working well. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted July 30, 2020 Share Posted July 30, 2020 It does look very solid. Seems the machine is working well. I never thought I'd say "I feel spoiled by my $150 Horrid Fate flux welder" But there it is! 😄 I'm struggling with the Lincoln Weld-pak *125* HD today. It is not going my way. While I admit I don't have my 'nice' gloves and auto-darkening helmet, I'd definitely be doing better with the bright green lunchbox. *edit detail* Link to comment Share on other sites More sharing options...
Gary Lewis Posted July 30, 2020 Share Posted July 30, 2020 I never thought I'd say "I feel spoiled by my $150 Horrid Fate flux welder" But there it is! 😄 I'm struggling with the Lincoln Weld-pak *125* HD today. It is not going my way. While I admit I don't have my 'nice' gloves and auto-darkening helmet, I'd definitely be doing better with the bright green lunchbox. *edit detail* That's a pretty significant statement! Wow. A Harbor Freight works better than a Lincoln. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted July 30, 2020 Share Posted July 30, 2020 That's a pretty significant statement! Wow. A Harbor Freight works better than a Lincoln. For me. In my situation... I'm not knocking the red box. Just a comparative data point, that I felt I should share. Link to comment Share on other sites More sharing options...
Danny G Posted August 10, 2020 Share Posted August 10, 2020 That's a pretty significant statement! Wow. A Harbor Freight works better than a Lincoln. I think it is a testament to how much HF is stepping up their quality and performance. Not to mention on the hand tools there is a lifetime warranty. I put that to the test the other day on a low profile ratchet. Was super easy swap in store. Link to comment Share on other sites More sharing options...
Recommended Posts