Jump to content
Bullnose Forums

Why Do Single-Tank Trucks Need A Tank Switch?


Recommended Posts

I found something in the catalog today that has me puzzled, so perhaps y'all can explain it to me.

As you can see below, the catalog says that 1980 - 86 trucks with a "single fuel system" take tank selector switch D5TZ 9A050-A, which is marked D5TB 9A050-AA and has 5 terminals. I just so happen to have one of those rascals and can tell you that it takes a different connector than all of the other tank selector switches, which have a 6-pin layout. (By the way, I have a page up that shows the various switches used on these trucks: Fuel Systems/Fuel System Wiring.)

I've gone to the EVTM's and am now even more confused. The 1981, 1884, and 1984 EVTM's show a 5-pin terminal that can only fit the D5TZ 9A050-A, and it isn't until the 1986 EVTM that the 6-pin layout appears. However, the catalog shows that a 6-pin format was used as early as '83.

But none of the EVTM's show a switch on single-tank trucks, only show a switch for trucks with dual tanks.

What am I missing? Why do trucks with only one tank need a switch? And, did they have one? Any of y'all have a single-tank truck? Does it have a switch?

Or, does "single fuel system" mean that they only run on a single fuel and not, say, gasoline and LPG?

Tank_Switch_Header.thumb.jpg.d3c0a02dfb61ced1f63ec59970fa25f4.jpg

Tank_Switch_1.thumb.jpg.5e28f990dd430ce3f1186d45b32c24d2.jpg

Tank_Switch_2.thumb.jpg.039b1a495a9325da00162a8b09ea4c09.jpg

Tank_Switch_3.thumb.jpg.035bf3aa9ed524e5960a2674eee23233.jpg

Tank_Switch_5.thumb.jpg.edbaee3e4bb9bcb36164018e273d2cd3.jpg

 

Link to comment
Share on other sites

Very likely, Ford and and Chrysler were all offering LP gas options for trucks. We had a father in our scout troop who would loan us a GMC pickup with the 305 V6 and 4 speed Hydra-Matic that ran on LP gas.

No tank switch on my single-tank flareside...

Link to comment
Share on other sites

×
×
  • Create New...